{"id":1635,"date":"2026-10-04T15:50:31","date_gmt":"2026-10-04T14:50:31","guid":{"rendered":"https:\/\/beleuchtung.vision\/wiki-led\/0-all-keywords-with-links\/"},"modified":"2026-11-21T09:05:59","modified_gmt":"2026-11-21T08:05:59","slug":"0-all-keywords-with-links","status":"publish","type":"br_wikiled","link":"https:\/\/beleuchtung.vision\/en\/wiki-led\/0-all-keywords-with-links\/","title":{"rendered":"0 All Keywords with Links"},"content":{"rendered":"<div class=\"entry-content clearfix\">\n<ul>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/2d-matrix-codes\/\" target=\"_self\" title=\"2D codes consist of polygonally, usually squarely arranged groups of data cells featuring a characteristic orientation symbol that enables identification of the code type. Frequently used examples include QR codes and Data Matrix codes. See also Barcode. 2D codes feature built-in error correction that allows data recovery even if the code is damaged or contaminated.\u2026\" class=\"encyclopedia\">2D \/ Matrix Codes<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/incident-lighting\/\" target=\"_self\" title=\"The illumination unit and the camera are located on the same side relative to the inspection object. A distinction is made between direct incident light and diffuse incident light. The counterpart to incident illumination is transmitted illumination (backlighting). Example of direct incident light (Source: Vision Doctor). B\u00fcchner offers a wide selection of surface illuminators and backlights.\" class=\"encyclopedia\">Incident Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/eye-safety\/\" target=\"_self\" title=\"Potential hazards to the eye posed by LEDs, luminaires, or other light sources are classified according to DIN EN 62471, 2009-03 edition (Photobiological safety of lamps and lamp systems; German version EN 62471:2008; IEC 62471:2006). The hazard can be induced thermally or photochemically. To evaluate a light source for resulting hazards, the following potential damages are examined: - Retinal damage caused by light - Retinal damage\u2026\" class=\"encyclopedia\">Eye Safety<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/bar-light-2\/\" target=\"_self\" title=\"Incident illumination consisting of one or a few rows of LEDs. Generates a stripe of light on the inspection object. Can be directed at various angles, thereby amplifying or reducing reflections. If the bar light is oriented at a shallow (grazing) angle relative to the inspection object, this is referred to as dark-field illumination. Other designations: bar light or line light. Example of a bar or line light from B\u00fcchner, shown here\u2026\" class=\"encyclopedia\">Bar Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/bar-light\/\" target=\"_self\" title=\"English term for &quot;Balkenbeleuchtung&quot;\" class=\"encyclopedia\">Bar Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/barcodes-linear-barcodes\/\" target=\"_self\" title=\"Collective term for barcodes (from English bar) featuring an optoelectronically readable printed pattern composed of vertical parallel bars of varying widths and spacings. The code represents data information in binary symbols. Barcodes can be captured by reading devices (cameras, scanners) and processed electronically. Barcodes are divided into three main categories: Linear barcodes\u2026\" class=\"encyclopedia\">Barcodes, Linear Barcodes<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/illumination\/\" target=\"_self\" title=\"Light source for machine vision systems. Different illumination types and \u2192 illumination techniques must be taken into account. Additional properties to consider include: direction of propagation (diffuse, directional, parallel, telecentric), wavelength\/color (UV, VIS, NIR, IR), \u2192 illuminance, homogeneity, \u2192 polarization, strobed or continuous. Crucial to selecting the type of illumination is what needs to be highlighted in the resulting image. The illumination setup for a\u2026\" class=\"encyclopedia\">Lighting<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/lighting-controllers\/\" target=\"_self\" title=\"See LED drivers.\" class=\"encyclopedia\">Lighting Controller<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/illuminance\/\" target=\"_self\" title=\"Illuminance Ev (&quot;v&quot; for visual) is the photometric equivalent of irradiance Ee in radiometry. Photometric quantities and units describe visible light in accordance with the physiological brightness perception of the human eye. Accordingly, illuminance corresponds to irradiance within the spectral range of the human eye. Colloquially, it describes the &quot;intensity&quot; or &quot;brightness&quot; of lighting. The SI unit is lux\u2026\" class=\"encyclopedia\">Illuminance<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/lighting-techniques\/\" target=\"_self\" title=\"The objective of various lighting techniques is to achieve the highest possible contrast of the object features to be detected, ensuring efficient and reliable machine vision or image analysis results. In this process, the interaction between the illumination and the inspection object along with its material properties must be taken into account. The fundamental division of lighting techniques is into incident (front) and transmitted (back) illumination. Further subcategories include\u2026\" class=\"encyclopedia\">Lighting Techniques<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/lighting-types\/\" target=\"_self\" title=\"LED illuminators are the most common lighting types. Depending on the specific application, halogen incandescent lamps, fluorescent light, cold light sources (metal halide light sources with fiber-optic light guides), or xenon flash lamps are also used. Fluorescent lamps (with high-frequency ballasts) are inexpensive, but rarely used because they age rapidly (service life approx. 10,000 h) and require warm-up time. Due to their exceptional focusability, lasers are particularly suited for structured illumination. A typical\u2026\" class=\"encyclopedia\">Lighting Types<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/irradiance\/\" target=\"_self\" title=\"Irradiance Ee (&quot;e&quot; for energetic), or radiant flux density, is the total electromagnetic energy power passing through a surface and is a radiometric quantity. It accurately describes the &quot;intensity&quot; of illumination in machine vision. The SI unit is W\/m\u00b2 (= power per unit area). To quantify &quot;intensity&quot; for illumination in the visible spectral range, the\u2026\" class=\"encyclopedia\">Irradiance<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/image-analysis\/\" target=\"_self\" title=\"Image analysis refers to software and algorithms and is therefore a component of machine vision systems. Image analysis encompasses a set of functions used to analyze the information present in images\u2014namely to detect, segment, characterize, and classify it. The distinction between image analysis and image processing is fluid.\" class=\"encyclopedia\">Image Analysis<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/image-processing\/\" target=\"_self\" title=\"A comprehensive term encompassing a wide variety of applications. Five typical application areas of image processing are distinguished, with fluid transitions between them: - Image generation in desktop publishing, electronic media, and video games; - Image transmission and corresponding image compression for conveying images via satellite and cable; - Image editing for aesthetic purposes to eliminate artifacts\u2026\" class=\"encyclopedia\">Machine Vision<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/machine-vision-system\/\" target=\"_self\" title=\"Integrating a machine vision system (MVS) into a manufacturing or production environment is typically a unique project. This requires an accurate specification of requirements. The fundamental setup of a machine vision system consists of the following components: - Illumination (predominantly LED lighting) - Digital camera(s) (CMOS, CCD, thermal imaging) - Lenses (entocentric, telecentric, microscope, telescope) - Video interface card, frame grabber -\u2026\" class=\"encyclopedia\">Machine Vision System<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/blue-light-hazard\/\" target=\"_self\" title=\"Blue Light Hazard (BLH) refers to a hazard to the retina caused by radiation in the range of approx. 410 to 480 nm (half-width) with a maximum sensitivity at 440 nm. This high-energy blue light can cause so-called photoretinitis, a photochemical damage to the retina caused by degeneration of the macula (AMD; damage to the retinal...\" class=\"encyclopedia\">Blue Light Hazard<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/strobe-control\/\" target=\"_self\" title=\"The performance of LEDs and LED lighting units is frequently limited by the self-heating of the components. One way to increase performance is through the use of strobe controllers. Since camera systems, with the exception of line scan and high-speed cameras, typically capture only brief exposures at a specific frame rate, synchronizing the illumination with image acquisition can offer distinct advantages to\u2026\" class=\"encyclopedia\">Strobe Control<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/brewsters-angle\/\" target=\"_self\" title=\"When unpolarized light strikes the interface between two media at Brewster's angle, the reflected light is polarized perpendicular to the plane of incidence. See also on Wikipedia\" class=\"encyclopedia\">Brewster&#8217;s Angle<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/mv\/\">MV<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/cloudy-day-illumination\/\" target=\"_self\" title=\"Cloudy day lighting (or cloudy day illumination) refers to highly diffuse incident illumination that casts no shadows. It is well-suited for inspecting glossy and curved objects. This lighting type includes dome lights, tunnel lights, and coaxial illuminators.\" class=\"encyclopedia\">Cloudy Day Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/controllers\/\" target=\"_self\" title=\"Controllers are utilized for precise current regulation (switching on and off) of LED illumination systems. Even minor fluctuations in voltage can significantly increase LED current and light output, potentially destroying the LEDs within a very short time. For this reason, accurate illumination control via the voltage supply alone is difficult to achieve. A controller enables an output current\u2026\" class=\"encyclopedia\">Controller<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/data-matrix-code\/\" target=\"_self\" title=\"DataMatrix (one of the most widely used 2D or matrix codes) was developed in 1989 by International Data Matrix (USA). Various development levels exist (ECC 0 to 200, ISS-Data Matrix). The standard version in general use is DataMatrix ECC 200. The dimensions of the rectangular code are variable. The symbol elements are square. The finder pattern consists of one horizontal and one vertical border line,\u2026\" class=\"encyclopedia\">Data Matrix Code<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/diffuse-backlight\/\" target=\"_self\" title=\"Similar to diffuse incident illumination, diffuse backlighting is achieved by using large-area light panels or surface illuminators. The light source is covered with semi-transparent plastic or glass plates. In conjunction with stabilized DC lighting, these units are ideal for dimensional measurement tasks.   Example of a diffuse backlight (Source: Vision Doctor). B\u00fcchner offers a wide selection of backlights\u2026\" class=\"encyclopedia\">Diffuse Backlight<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/diffuse-incident-light\/\" target=\"_self\" title=\"With diffuse incident illumination, the light does not originate from a clearly identifiable direction, but is emitted across a large surface area. This can be accomplished by placing a diffuser (frosted glass pane) in front of a direct incident light source and\/or through large emitting surfaces. Additional diffuse incident lights include coaxial lights, dome lights, and tunnel lights. Diffuse incident lights are particularly suitable for glossy, metallic, and slightly uneven objects.\u2026\" class=\"encyclopedia\">Diffuse Incident Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/din-rail-top-hat-rail\/\" target=\"_self\" title=\"The DIN rail is a 35 mm mounting rail, also known as a top-hat rail or mounting track. The dimensions of the rail are specified in DIN\/EN\/IEC 60715 (formerly DIN\/EN 50022). The rail thickness can be either 1 mm or 2.3 mm.     Top-hat rail, unpopulated and populated.\" class=\"encyclopedia\">DIN Rail \/ Top-Hat Rail<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/direct-incident-light\/\" target=\"_self\" title=\"Direct incident light can be any form of illumination in which LEDs shine directly onto the object. A ring light is frequently chosen for this purpose. However, line lights, bar lights, or surface illuminators are also viable options. Specular object surfaces may cause disruptive glare or reflections. A distinction is made between bright-field and dark-field illumination. B\u00fcchner offers a wide range of ring lights, line lights,\u2026\" class=\"encyclopedia\">Direct Incident Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/dome-lighting\/\" target=\"_self\" title=\"The optimal diffuse incident light is achieved with a dome light. It provides homogeneous illumination from all directions and is therefore often referred to as &quot;cloudy day illumination.&quot; Dome lights are ideal for glossy and\/or uneven inspection surfaces, as scratches and surface imperfections are softly illuminated. Surfaces appear quite uniform and consequently texture-free. Maintaining the shortest possible working distance is essential\u2026\" class=\"encyclopedia\">Dome Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/dark-field-illumination\/\" target=\"_self\" title=\"In dark-field illumination (see also Direct Incident Light), the light source is positioned so that direct reflections from a perfectly smooth surface do not enter the lens. This is achieved by directing light at a shallow angle from the side. This lighting method derives its name from the fact that a completely smooth, reflective surface appears dark. See also the opposite method: bright-field illumination.   Principle and example\u2026\" class=\"encyclopedia\">Dark-Field Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/transmitted-lighting\/\" target=\"_self\" title=\"See also Backlight.\" class=\"encyclopedia\">Transmitted Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/duty-cycle\/\" target=\"_self\" title=\"The duty cycle describes the ratio of pulse duration (LED on) to period duration. The lower the duty cycle (in %), the less the LEDs heat up; consequently, they can be operated at higher currents (greater brightness) and have a longer service life. The duty cycle is managed via a controller.\" class=\"encyclopedia\">Duty Cycle<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/emc\/\">EMC<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/color\/\" target=\"_self\" title=\"Color is a sensory perception conveyed by the eye and brain, evoked by light with wavelengths between 380 and 780 nm.   Visible spectrum. In machine vision, the use of different lighting colors creates contrasts that allow inspection tasks to be solved more effectively or efficiently. A color camera is not always required. For instance,\u2026\" class=\"encyclopedia\">Color<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/color-temperature\/\" target=\"_self\" title=\"Color temperature (or light color) describes the chromatic appearance of a light source and corresponds to the temperature of a &quot;black body&quot; at which it emits light of the identical color. Color temperature is not a measure of the physical temperature of the light, but rather describes the perceived color, ranging from extra warm white (&lt; 2,700 K), warm white (&lt; 3,300 K) to neutral or cool white (3,300 to\u2026\" class=\"encyclopedia\">Color Temperature<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/area-lighting\/\" target=\"_self\" title=\"Illuminators designed for planar coverage. Available as backlights or transmitted lights as well as incident illuminators (with and without camera aperture), providing diffuse or direct emission.   Example of an incident surface illuminator with camera aperture (TOP-LIGHT-8-CO). B\u00fcchner Lichtsysteme offers an extensive selection of area lighting products.\" class=\"encyclopedia\">Area Lighting<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/directional-backlight\/\" target=\"_self\" title=\"A common challenge with diffuse backlighting is the occurrence of stray side light. For high-precision metrology tasks, significantly superior results are achieved by using telecentric backlighting. Similar to a telecentric lens, this form of illumination features a parallel optical path. This is accomplished using a collimator lens positioned between the light source and the light panel.\" class=\"encyclopedia\">Collimated Backlight<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/directed-incident-light\/\" target=\"_self\" title=\"See Direct Incident Light.\" class=\"encyclopedia\">Directional Incident Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/brightfield-illumination\/\" target=\"_self\" title=\"In bright-field illumination (see also Direct Incident Light), the camera is positioned directly in the reflection path of the light rays, detecting smooth surfaces with high contrast because rays striking a smooth surface are reflected back toward their origin. An example of bright-field illumination is coaxial lighting, where the light source and camera are oriented perpendicularly to the inspection object. Alternatively, the camera\u2026\" class=\"encyclopedia\">Bright-Field Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/brightness\/\" target=\"_self\" title=\"Brightness is a subjective term denoting the magnitude or intensity of visual perception of visible light.\" class=\"encyclopedia\">Brightness<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/high-speed-lighting\/\" target=\"_self\" title=\"High-speed or strobe illuminators emit light for very brief intervals, typically &lt; 1 ms. In this process, the flash duration is shorter than the camera's exposure time and occurs within that exposure window. To ensure the strobe fires at the precise moment of image acquisition, strobe synchronization must be precisely defined and stable. To ensure consistent illumination even with extremely short light pulses,\u2026\" class=\"encyclopedia\">High-Speed Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/backlighting\/\" target=\"_self\" title=\"In backlighting or transmitted illumination, the object is positioned between the light source and the camera. The camera captures the object as a silhouette. Consequently, this type of lighting generates outstanding contrast and is ideally suited for dimensional measurement tasks. Example of backlighting (Source: Vision Doctor). A distinction is made between diffuse backlights, collimated backlights, and polarized backlights. At B\u00fcchner, you will find an\u2026\" class=\"encyclopedia\">Backlight<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/top-hat-rail\/\" target=\"_self\" title=\"See DIN Rail\" class=\"encyclopedia\">Top-Hat Rail<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/machine-vision\/\">Machine Vision (MV)<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/infrared-radiation\/\" target=\"_self\" title=\"Infrared radiation (IR radiation) refers to light with wavelengths between 780 nm and 1 mm. IR radiation is divided into near-IR (NIR, 780 to 1400 nm), short\/mid-wave IR (MIR, 1.4 to 15 \u00b5m), and far-IR (FIR, 15 to 1000 \u00b5m).   Spectral ranges from UV to MIR. The wavelengths most commonly used in machine vision\u2026\" class=\"encyclopedia\">Infrared Radiation<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/intensity\/\" target=\"_self\" title=\"An imprecise term used, for example, for radiant intensity, light intensity, or areal power density in energy transport. The objective measurement quantity for the &quot;intensity&quot; of lighting systems is \u2192 irradiance E or Ee, measured in W\/m\u00b2. When the specific characteristics of human visual perception are taken into account, it is referred to as \u2192 illuminance Ev.\" class=\"encyclopedia\">Intensity<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/ip-ratings\/\" target=\"_self\" title=\"IP ratings define the degree of protection provided by electrical equipment against contact, foreign bodies, and water ingress. The abbreviation IP stands for &quot;Ingress Protection.&quot; The IP rating designations are defined in IEC\/EN 60529 and consist of two digits. The first digit indicates protection against physical contact and ingress of dust (foreign bodies), while the second digit specifies protection against moisture\u2026\" class=\"encyclopedia\">IP Ratings<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/jitter\/\" target=\"_self\" title=\"Jitter is any deviation or displacement of signal pulses in a high-frequency digital signal, or irregularities within a signal. The deviation may relate to amplitude, phase timing, or the pulse width of the signal. Causes of jitter include electromagnetic interference (EMI) and crosstalk with adjacent signals. The\u2026\" class=\"encyclopedia\">Jitter<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/calibration\/\" target=\"_self\" title=\"A technical term from metrology. It is used for measurement processes applied to reliably determine and document the deviations of measuring systems or standards in a repeatable manner. Adjustment or verification is carried out in relation to other reference systems or objects, referred to as measurement standards. Calibration does not mean legal verification, conformity assessment, adjustment, or certification.\" class=\"encyclopedia\">Calibration<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/coaxial-lighting\/\" target=\"_self\" title=\"Coaxial illumination is a form of diffuse incident or bright-field illumination. Light from an LED area light is coupled laterally into the camera's optical path via a beam splitter and projected onto the inspection object. As a result, the inspection object is illuminated with exceptional uniformity and without casting shadows. The light reflected from the inspection specimen then passes through the beam splitter to the camera. Coaxial illuminators are ideal for\u2026\" class=\"encyclopedia\">Coaxial Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/condenser\/\" target=\"_self\" title=\"See Telecentric Illumination.\" class=\"encyclopedia\">Condenser<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/constant-current-controller\/\">Constant Current Controller<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/convection-cooling\/\" target=\"_self\" title=\"Convection cooling is a passive cooling method that operates without forced ventilation via mechanical fans. Heat dissipation relies on natural convection (the transfer of thermal energy within a moving fluid medium). Heated air particles exhibit lower density, rise within the power supply unit, and thereby generate airflow. Convection (or thermal convection) is, alongside thermal conduction and thermal radiation, one of the three\u2026\" class=\"encyclopedia\">Convection Cooling<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/lambertian-radiator\/\" target=\"_self\" title=\"A Lambertian radiator is a physically ideal emitter whose radiance (or luminance) is constant in all directions, making it perfectly diffuse. A Lambertian material appears equally bright regardless of the viewing angle. In particular, a black-body radiator functions as a Lambertian radiator. The Lambertian radiator is described by Lambert's cosine law. Typical Lambertian radiators include light-emitting diodes (LEDs) without plastic lenses, dipole antennas (\u03bb\/2 dipoles)\u2026\" class=\"encyclopedia\">Lambertian Radiator<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/laser\/\" target=\"_self\" title=\"Acronym for &quot;Light Amplification by Stimulated Emission of Radiation.&quot; In industrial machine vision, laser illumination allows specialized lighting configurations such as structured illumination to be realized. The laser beam can take various profiles, which, with the exception of spot or line profiles, are generated using diffractive optical elements. While standard\u2026\" class=\"encyclopedia\">Laser<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/laser-triangulation\/\" target=\"_self\" title=\"Triangulation is the determination of distance through angular measurement within triangles using trigonometric functions. When a laser spot (one-dimensional measurement) or a laser line (two-dimensional measurement; light section method) is projected obliquely onto an object, the line or spot shifts depending on the height profile of the object. This offset serves as a measure of height and can be captured by a camera\u2026\" class=\"encyclopedia\">Laser Triangulation<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/latency-of-led-lighting\/\" target=\"_self\" title=\"Latency (turn-on behavior), or typical LED turn-on delay, describes the time required for the illumination to reach approximately 90% brightness from the arrival of the trigger signal. This is caused by capacitances in the electronic circuitry, the LED cable (longer cables result in higher capacitance and thus longer strobe delay), and the LED itself.\" class=\"encyclopedia\">LED Illumination Latency<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/service-life\/\" target=\"_self\" title=\"The service life or life expectancy of a device describes its useful operating life in hours. This is the period of operation before the first signs of wear (e.g., dried-out capacitors) occur. The component with the shortest life expectancy determines the overall service life of the device. Achieving a long service life depends on the device design,\u2026\" class=\"encyclopedia\">Service Life<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/led\/\">LED<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/led-lighting\/\" target=\"_self\" title=\"The most prevalent lighting type in machine vision. Light sources are LEDs. Advantages include an exceptionally long operating life (up to 100,000 h), high mechanical robustness (shock and vibration resistance), broad spectral availability (from UV to IR, white), adaptability across numerous lighting configurations, compact dimensions, simple electrical control, outstanding switching and strobing capability, and maintenance-free operation. Key strengths of LED illumination systems include: -\u2026\" class=\"encyclopedia\">LED Lighting<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/led-controller\/\" target=\"_self\" title=\"See LED drivers.\" class=\"encyclopedia\">LED Control<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/led-current-control\/\" target=\"_self\" title=\"See LED drivers.\" class=\"encyclopedia\">LED Current Control<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/led-drivers\/\" target=\"_self\" title=\"Due to the characteristic diode curve of LEDs, even a minor change in supply voltage results in a substantial shift in diode current. In addition, the characteristic curve depends on the junction temperature of the LEDs. Consequently, an LED operated without current limitation at excessive voltage can rapidly suffer catastrophic failure (thermal runaway). For this reason, LED illumination systems are powered almost exclusively\u2026\" class=\"encyclopedia\">LED Driver<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/light\/\" target=\"_self\" title=\"Light visible to humans (visual light) is electromagnetic radiation with wavelengths between approximately 380 and 760 nm. Below 400 nm, we speak of ultraviolet radiation (UV), which extends as extremely hard UV radiation down to 10 nm. The UV ranges of radiation, which also include sunlight, are designated as UV-B from 280 \u2013 315 nm...\" class=\"encyclopedia\">Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/light-guides\/\" target=\"_self\" title=\"Light guides are transparent, flexible materials\u2014such as fibers, tubes, or rods\u2014through which light is transmitted. Light is primarily propagated via total internal reflection at the boundary surface of the light guide. For this to occur, the medium surrounding the light guide must have a lower refractive index n or a refractive index gradient. Another approach involves applying a reflective coating to the boundary surface. Light-guiding materials can include plastic\u2026\" class=\"encyclopedia\">Light Guide<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/line-lighting\/\" target=\"_self\" title=\"A line light (or bar light) refers to a light source that projects a linear light pattern. Examples include LED arrays equipped with cylindrical lenses or a laser fitted with specialized projection optics.   Fig.: Examples of line and bar lights, naturally from B\u00fcchner. They are used for targeted illumination in line scan camera applications (line illumination) or for light section methods utilizing area scan cameras (e.g., laser triangulation). In surface inspection using line scan cameras, line lights\u2026\" class=\"encyclopedia\">Line Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/matrix-codes\/\" target=\"_self\" title=\"See 2D codes.\" class=\"encyclopedia\">Matrix Codes<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/mtbf\/\" target=\"_self\" title=\"MTBF (Mean Time Between Failures) represents the statistical probability of a &quot;random hardware failure.&quot; Various standards are available for calculating MTBF values, such as SN 29500, IEC 61709, MIL-HDBK-217F, Telcordia (Bellcore), and others. The calculation consistently follows the same methodology. The standard provides a database containing base failure rates for individual components to\u2026\" class=\"encyclopedia\">MTBF<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/nir\/\">NIR<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/optocoupler\/\" target=\"_self\" title=\"An optocoupler is an electronic component consisting of a photodiode (LED) and an electrically isolated phototransistor. It is used for signal transmission and is frequently employed for galvanic isolation within the control loop of power supply units. (For more details, see Wikipedia)\" class=\"encyclopedia\">Optocoupler<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/pelv\/\" target=\"_self\" title=\"PELV (Protective Extra Low Voltage; see also SELV) describes a voltage selected to be so low (extra-low voltage) that there is no danger from body currents in the event of indirect contact or non-extensive direct contact. If insulation fails, sufficient protection must still be provided. For power supply units, this is achieved by...\" class=\"encyclopedia\">PELV<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/poe-power-over-ethernet\/\" target=\"_self\" title=\"PoE (Power over Ethernet) supplies network-compatible devices with electrical power via an eight-wire Ethernet cable. The primary advantage of a PoE solution is eliminating the need for a separate power cable. This allows Ethernet-connected devices to be installed in hard-to-reach or space-constrained applications. In PoE-enabled setups, a distinction is made between PSE devices (Power Sourcing Equipment) and PD devices (Powered\u2026\" class=\"encyclopedia\">PoE (Power over Ethernet)<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarization\/\" target=\"_self\" title=\"Polarized light that oscillates in only a single direction perpendicular to its direction of propagation.   Principle of light polarization (Source: Vision Doctor). Polarized light can be used to prevent specular reflections (especially with ring lights) and to reveal structural details in transparent objects. When a surface is illuminated with polarized incident light, all specular reflections\u2026\" class=\"encyclopedia\">Polarization<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarizing-filter\/\" target=\"_self\" title=\"An optical filter (glass plate or film) from which nearly completely linearly polarized light emerges. Polarizing filters can be used to eliminate unwanted reflections. In most cases, it is a rotatable lens filter that suppresses glare and delivers richer color reproduction. Disruptive reflections from glass panes, liquid surfaces, metallic materials, or smooth, reflective plastic surfaces can be substantially reduced. To eliminate\u2026\" class=\"encyclopedia\">Polarizing Filter<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarizing-film\/\" target=\"_self\" title=\"See Polarizing Filter\" class=\"encyclopedia\">Polarizing Film<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarized-backlighting\/\" target=\"_self\" title=\"As with polarized incident illumination, polarizing filters can also be utilized with backlighting. This makes it possible to enhance contrast in transparent parts and even visualize internal surface stress. For this purpose, a polarizing filter is applied to the light panel, and a second polarizing filter is mounted in front of the camera lens. Depending on the relative angle between the two polarizing filters, varying levels of contrast are produced.\" class=\"encyclopedia\">Polarized Backlight<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarized-incident-light\/\" target=\"_self\" title=\"See Polarization\" class=\"encyclopedia\">Polarized Incident Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/polarized-light\/\" target=\"_self\" title=\"See Polarization\" class=\"encyclopedia\">Polarized Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/pwm\/\">PWM<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/qr-code\/\" target=\"_self\" title=\"The QR code (Quick Response code; 2D code) was developed in 1994 by Denso (Japan). It features a square geometry and is easily recognized by its finder patterns\u2014nested light and dark squares located in three corners. The symbol elements are squares, ranging from a minimum of 21 x 21 to a maximum of 177 x 177 elements within the symbol. Four error correction levels are available,\u2026\" class=\"encyclopedia\">QR Code<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/quality-assurance-qa\/\" target=\"_self\" title=\"Quality assurance (QA) and quality control (QC) are overarching terms encompassing numerous methods, processes, and measures aimed at achieving and verifying defined quality standards. According to DIN EN ISO 9000:2015, quality assurance is that part of quality management focused on providing confidence that quality requirements will be fulfilled. In Germany, quality assurance gained prominence as companies began\u2026\" class=\"encyclopedia\">Quality Assurance (QA)<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/reach\/\" target=\"_self\" title=\"REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) Regulation (EC) No. 1907\/2006 is a European Union chemicals regulation that entered into force on June 1, 2007. REACH governs the manufacture and use of chemical substances and their potential impacts on human health and the environment. See also RoHS.\" class=\"encyclopedia\">REACH<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/reed-solomon-error-correction\/\" target=\"_self\" title=\"Reed-Solomon error correction, an error-correcting code used in transmitting and receiving digital data (including 2D codes), was originally developed for NASA. It was required for telemetry transmission from deep space probes, where the outgoing signal weakens significantly over time and becomes increasingly degraded by noise. Irving S. Reed and Gustave Solomon were mathematicians at Hughes Aerospace who developed this algebraic method\u2026\" class=\"encyclopedia\">Reed-Solomon Error Correction<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/cleanroom\/\" target=\"_self\" title=\"A cleanroom or ultra-clean room refers to a controlled environment specifically engineered to minimize the concentration of airborne particles (aerosols). Such environments are essential, for example, in the semiconductor industry, where dust and airborne particulate matter present in ambient air would compromise the fabrication of integrated circuits. Cleanrooms are utilized in optics,\u2026\" class=\"encyclopedia\">Cleanroom<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/rgb\/\">RGB<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/ring-lighting\/\" target=\"_self\" title=\"Ring lights provide intense, shadow-free illumination directed along the optical axis of the camera. They are frequently used in combination with polarizing filters to eliminate specular reflections. Ring lights are available in various configurations. B\u00fcchner offers an extensive selection of ring lights \u2192 here.\" class=\"encyclopedia\">Ring Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/rohs\/\" target=\"_self\" title=\"RoHS is an EU directive adopted in 2011 that restricts or prohibits the use of specific hazardous substances in electrical and electronic equipment. The acronym stands for &quot;Restriction of Hazardous Substances.&quot; To mitigate environmental risks and pollution caused by hazardous materials, all products placed on the EU market must be RoHS-compliant. (The abbreviation was originally established under EC Directive 2002\/95\/EC\u2026\" class=\"encyclopedia\">RoHS<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/shock-and-vibration-resistance\/\" target=\"_self\" title=\"Shock and vibration resistance (impact resistance) provides information about the robustness of the mechanical design of a device. The methods for evaluating shock resistance are defined in IEC 60068-2-27. Shock resistance is important for the operating and transport conditions of the devices. The methods for evaluating vibration resistance are defined in IEC 60068-2-6 and IEC 60068-2-64.\" class=\"encyclopedia\">Shock and Vibration Resistance<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/protection-class\/\" target=\"_self\" title=\"IEC\/EN 61140 classifies electrical equipment according to safety against hazardous body currents and electric shock. The design features of equipment are categorized into the following protection classes: - Class 0: No protection. Such equipment is not permitted within the European Union. - Class I: Equipment equipped with a protective earth conductor connection and basic insulation between accessible conductive parts and the protective conductor. A\u2026\" class=\"encyclopedia\">Protection Class<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/selv\/\" target=\"_self\" title=\"SELV (Safety Extra Low Voltage) describes a voltage selected to be so low that there is no danger from excessive body currents in the event of direct contact, both during intended operation and in the event of a single fault. If insulation fails, sufficient protection must still be provided. For power supply units...\" class=\"encyclopedia\">SELV<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/signal-processing\/\" target=\"_self\" title=\"In signal processing, information is extracted from preprocessed signals to derive actionable conclusions. A distinction is made between analog and digital signal processing. Common tools in both analog and digital signal processing are filters, which process a signal in order to remove unwanted components. In digital signal processing\u2026\" class=\"encyclopedia\">Signal Processing<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/scaling\/\" target=\"_self\" title=\"- A term utilized across numerous technical and scientific disciplines to denote the adaptation of representations, objects, and designs to altered scales; - In mathematics, it refers to changing a value mapped onto a scale; - In graphic design, it denotes resizing an image.\" class=\"encyclopedia\">Scaling<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/spot-lighting\/\" target=\"_self\" title=\"Spotlights are ideal for illuminating small objects from long working distances using standard and high-power LEDs, as well as for coupling light into lens systems equipped with a coaxial illumination port. The light beam can be focused using auxiliary optics (condenser lens or C-mount objective).\" class=\"encyclopedia\">Spotlight<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/strobe-controller\/\" target=\"_self\" title=\"See Controllers\" class=\"encyclopedia\">Strobe Controller<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/current-control\/\" target=\"_self\" title=\"See Controllers\" class=\"encyclopedia\">Current Control<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/structured-light-illumination\/\" target=\"_self\" title=\"Structured illumination (see also Direct Incident Light) refers to the projection of lines, grids, dots, or circles onto an object. This enables the evaluation of three-dimensional object characteristics as well as dimensional inspection and presence verification, even in the absence of brightness contrast. In addition to line projectors, lasers (laser triangulation) are frequently employed for this purpose, as their superior focusability enables highly accurate projections.\" class=\"encyclopedia\">Structured Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/telecentric-illumination\/\" target=\"_self\" title=\"Telecentric illumination systems (or collimated backlights, transmitted light units, or condenser illuminators) are optical systems whose light source (typically an LED) is imaged at infinity, producing a parallel beam path that illuminates the target object. This achieves superior edge detection and significantly improved measurement accuracy in optical metrology. Particularly when paired with telecentric lenses, reflections\u2026\" class=\"encyclopedia\">Telecentric Illumination<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/thermal-runaway\/\" target=\"_self\" title=\"All semiconductors, including LEDs, generate heat as a byproduct of their operation. The more current the component draws, the more thermal energy must be dissipated. When adequate thermal management is implemented, the component will not exceed its maximum operating temperature. If heat dissipation measures are insufficient, overheating occurs. In this scenario, the device's electrical conductivity\u2026\" class=\"encyclopedia\">Thermal Runaway<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/translucence\/\" target=\"_self\" title=\"Partial transmission of light through a material (from Latin lux for light). Translucent materials allow light to pass through, but objects positioned behind them cannot be clearly resolved, as is the case with frosted glass. It is often confused with transparency (complete optical clarity). The inverse of translucence is opacity (impermeability to light, cloudiness).\" class=\"encyclopedia\">Translucence<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/tunnel-illumination\/\" target=\"_self\" title=\"Tunnel illumination is an elongated, tunnel-shaped variation of dome illumination. It is ideal for the illumination of cylindrical objects made of metallic and reflective materials. Tunnel illumination systems from B\u00fcchner can be found here.\" class=\"encyclopedia\">Tunnel Light<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/ups\/\">UPS<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/uv-light-uv-radiation\/\" target=\"_self\" title=\"Common designation for ultraviolet light or ultraviolet radiation. Electromagnetic radiation within the optical frequency spectrum with wavelengths shorter than those visible to the human eye. &quot;Ultraviolet&quot; signifies &quot;beyond violet,&quot; representing the spectral stimulus with the shortest wavelength still discernible to the human eye. X-rays succeed UV radiation in the electromagnetic spectrum. The UV spectrum spans from 380 to 100 nm (380 nm marks the limit of human sensitivity\u2026\" class=\"encyclopedia\">UV Light, UV Radiation<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/pollution-degree\/\" target=\"_self\" title=\"Pollution degree defines environmental influences such as dust, humidity, and corrosive substances that can affect an electrical component's electrical insulation (clearances and creepage distances). IEC\/EN 60664-1 and VDE 0110-1 classify four pollution degrees: - Pollution Degree 1: No pollution or only dry, non-conductive pollution occurs. - Pollution Degree 2: Only non-conductive pollution\u2026\" class=\"encyclopedia\">Pollution Degree<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/thermal-expansion\/\" target=\"_self\" title=\"Also referred to as thermal expansion: the change in geometric dimensions of a body caused by a change in its temperature. The coefficient of thermal expansion serves as the characteristic parameter. Thermal expansion leads to a change in the density of the body. In fluids, this may also be accompanied by altered pressure conditions.\" class=\"encyclopedia\">Thermal Expansion<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/thermal-conductivity\/\" target=\"_self\" title=\"The specific thermal conductivity or heat conductivity \u03bb of a material is a quantitative measure of its ability to conduct thermal energy. Its unit is W \/ (m \u00b7 K) (watts per meter-kelvin). It describes how effectively or poorly a material conducts heat and, consequently, its suitability for thermal insulation. Thermal insulation is more effective\u2026\" class=\"encyclopedia\">Thermal Conductivity<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/thermal-grease-thermal-paste\/\" target=\"_self\" title=\"Thermal greases and pastes feature high thermal conductivity coefficients and serve to optimize the electrical conductivity of surfaces. Typical areas of application include the manufacturing, assembly, and repair of printed circuit boards, PCBs, sensors, and other electronic and microelectronic components.\" class=\"encyclopedia\">Thermal Grease, Thermal Paste<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/thermal-conductivity-coefficient\/\" target=\"_self\" title=\"A measure of a material's ability to conduct thermal energy. See also Thermal Conductivity.\" class=\"encyclopedia\">Thermal Conductivity Coefficient<\/a><\/li>\n<li><a href=\"https:\/\/beleuchtung.vision\/en\/wiki-led\/wide-range-input\/\" target=\"_self\" title=\"In the context of single-phase power supplies, a wide-range input refers to an input that covers nominal voltages of 100-240 VAC without the need for automatic or manual switching.\" class=\"encyclopedia\">Wide-Range Input<\/a><\/li>\n<\/ul><\/div>\n","protected":false},"excerpt":{"rendered":"<p>2D \/ Matrix Codes Incident Illumination Eye Safety Bar Light bar light Barcodes, Linear Barcodes Lighting Lighting Controller Illuminance Lighting Techniques Lighting Types Irradiance Image Analysis Machine Vision Machine Vision System Blue Light Hazard Strobe Control Brewster&#8217;s Angle MV Cloudy Day Illumination Controller Data Matrix Code Diffuse \u2026<\/p>\n","protected":false},"featured_media":0,"template":"","class_list":["post-1635","br_wikiled","type-br_wikiled","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/beleuchtung.vision\/en\/wp-json\/wp\/v2\/br_wikiled\/1635","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/beleuchtung.vision\/en\/wp-json\/wp\/v2\/br_wikiled"}],"about":[{"href":"https:\/\/beleuchtung.vision\/en\/wp-json\/wp\/v2\/types\/br_wikiled"}],"version-history":[{"count":0,"href":"https:\/\/beleuchtung.vision\/en\/wp-json\/wp\/v2\/br_wikiled\/1635\/revisions"}],"wp:attachment":[{"href":"https:\/\/beleuchtung.vision\/en\/wp-json\/wp\/v2\/media?parent=1635"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}