← WikiLED A–Z

WikiLED · LED-Glossar

Front Materials, Diffusers, and Polarizing Filters

Front materials and light transmission according to V1.1; including single-axis and dual-axis collimated fronts.

Interchangeable fronts and diffusers made of PMMA are available for many of our lighting systems. Different materials and surfaces change the optical properties and light distribution. The selection depends on the inspection task and the versions offered for the respective lighting.

Comparison of Front Materials

The overview is based on the Technical Information “Front / Diffuser Materials,” Version 1.1. The example codes refer to fronts with a material thickness of 3 mm.

Front / Material Light Transmission Example Code (3 mm)
Clear, anti-reflective 92% Sxxx-13A
Clear, frosted on one side 91% Sxxx-13S1
Clear, frosted on both sides 92% Sxxx-13S2
Material 017 90% Sxxx-33S0
Material 010 68% Sxxx-23S0
Material 060 45% Sxxx-43S0
Linear polarizing filter 42% Sxxx-53S0

The documentation specifies clear anti-reflective fronts as standard for incident light illumination, Material 060 for backlighting, and clear UV-transmissive fronts for UV lighting. The specifications for the specific product version remain decisive.

Collimated Fronts

Version 1.1 additionally lists single-axis and dual-axis collimated versions based on Material 060:

Version Example Code
1-axis collimated, 0° version Sxxx-43S0-KOL1-0
1-axis collimated, 90° version Sxxx-43S0-KOL1-90
2-axis collimated Sxxx-43S0-KOL2

The suffixes designate the documented front versions. No general LED beam angle or specific collimation angle is derived from this. Whether the desired front is available for your lighting can be found in the assigned product accessories.

UV-Transmissive Fronts

  • Sxxx-13S0-UV: clear, UV-transmissive, 3 mm.
  • Sxxx-13S1-UV: clear, frosted on one side, UV-transmissive, 3 mm.

How Does the Front Change the Light?

The comparison images show the documented light distribution using the example of a LOGO-2, Red with a 30° beam angle. They apply to this example and serve to compare the fronts. Crystal Ice is also included in the image overview; the standard front and transmission table above corresponds to Version 1.1.

Understanding Order Codes

The example S15-13S0-UV is composed of the product group, material type, material thickness, surface, and a possible special property:

  • Product group: in the example S15. Sxxx serves as a placeholder for the respective product group in the tables.
  • Material type: 1 = clear, 2 = Material 010, 3 = Material 017, 4 = Material 060, 5 = linear polarizing filter.
  • Material thickness: 3 mm in the example.
  • Surface: A = anti-reflective, S0 = no structure, S1 = frosted on one side, S2 = frosted on both sides.
  • Special properties: UV = UV-transmissive; KOL1-0 or KOL1-90 = 1-axis collimated versions; KOL2 = 2-axis collimated.

Selecting the Right Front

Compare the light distribution and check the assignment of the front to the specific lighting. The complete article number of the item listed in the product accessories is decisive for the order.

View fronts, diffusers, and polarization accessories →

Technical Basis

Material overview, light transmission values, standard fronts, and collimation options correspond to Technical Information “Front / Diffuser Materials,” Version 1.1. Subject to technical changes.

The existing original images will continue to be used. The previous English documentation remains accessible as a comparison document; it contains transmission values from Version 1.0. For the material overview in this article, the specifications of Version 1.1 listed above apply.

Open previous English comparison document V1.0 as PDF →

Discuss the right front for your inspection task →