Interchangeable fronts and diffusers made of PMMA are available for many of our lighting systems. Different materials and surfaces change the optical properties and light distribution. The selection depends on the inspection task and the versions offered for the respective lighting.
Comparison of Front Materials
The overview is based on the Technical Information “Front / Diffuser Materials,” Version 1.1. The example codes refer to fronts with a material thickness of 3 mm.
| Front / Material | Light Transmission | Example Code (3 mm) |
|---|---|---|
| Clear, anti-reflective | 92% | Sxxx-13A |
| Clear, frosted on one side | 91% | Sxxx-13S1 |
| Clear, frosted on both sides | 92% | Sxxx-13S2 |
| Material 017 | 90% | Sxxx-33S0 |
| Material 010 | 68% | Sxxx-23S0 |
| Material 060 | 45% | Sxxx-43S0 |
| Linear polarizing filter | 42% | Sxxx-53S0 |
The documentation specifies clear anti-reflective fronts as standard for incident light illumination, Material 060 for backlighting, and clear UV-transmissive fronts for UV lighting. The specifications for the specific product version remain decisive.
Collimated Fronts
Version 1.1 additionally lists single-axis and dual-axis collimated versions based on Material 060:
| Version | Example Code |
|---|---|
| 1-axis collimated, 0° version | Sxxx-43S0-KOL1-0 |
| 1-axis collimated, 90° version | Sxxx-43S0-KOL1-90 |
| 2-axis collimated | Sxxx-43S0-KOL2 |
The suffixes designate the documented front versions. No general LED beam angle or specific collimation angle is derived from this. Whether the desired front is available for your lighting can be found in the assigned product accessories.
UV-Transmissive Fronts
Sxxx-13S0-UV: clear, UV-transmissive, 3 mm.Sxxx-13S1-UV: clear, frosted on one side, UV-transmissive, 3 mm.
How Does the Front Change the Light?
The comparison images show the documented light distribution using the example of a LOGO-2, Red with a 30° beam angle. They apply to this example and serve to compare the fronts. Crystal Ice is also included in the image overview; the standard front and transmission table above corresponds to Version 1.1.







Understanding Order Codes
The example S15-13S0-UV is composed of the product group, material type, material thickness, surface, and a possible special property:
- Product group: in the example
S15.Sxxxserves as a placeholder for the respective product group in the tables. - Material type: 1 = clear, 2 = Material 010, 3 = Material 017, 4 = Material 060, 5 = linear polarizing filter.
- Material thickness: 3 mm in the example.
- Surface: A = anti-reflective, S0 = no structure, S1 = frosted on one side, S2 = frosted on both sides.
- Special properties: UV = UV-transmissive; KOL1-0 or KOL1-90 = 1-axis collimated versions; KOL2 = 2-axis collimated.
Selecting the Right Front
Compare the light distribution and check the assignment of the front to the specific lighting. The complete article number of the item listed in the product accessories is decisive for the order.
View fronts, diffusers, and polarization accessories →
Technical Basis
Material overview, light transmission values, standard fronts, and collimation options correspond to Technical Information “Front / Diffuser Materials,” Version 1.1. Subject to technical changes.
The existing original images will continue to be used. The previous English documentation remains accessible as a comparison document; it contains transmission values from Version 1.0. For the material overview in this article, the specifications of Version 1.1 listed above apply.