English for “Light Amplification by Stimulated Emission of Radiation,” light amplification by stimulated emission of radiation.
With laser lighting, special types of illumination such as structured lighting can be achieved for industrial image processing. The laser beam can take various forms, which, with the exception of point or line shapes, are generated with the help of diffractive optical elements.
While normal lighting produces a two-dimensional image (x and y), information about the spatial contours (z) can often be obtained with the help of lasers. If the spatial offset of obliquely projected laser lines and other patterns is evaluated, this is also referred to as → Laser triangulation. Laser light is normally linearly polarized.
Problems in the evaluation of laser lines can occur due to so-called “speckles.” This describes the grainy, shimmering light spots visible to the eye that appear on rough surfaces of paper, wood, plastics, and metals. The cause of this is the coherent light of the laser. The surface irregularities lead to an overlap and to three-dimensional interference, which is perceived in the human eye (on the retina) or on the camera sensor.
A laser line is therefore no longer imaged as a sharp line, but as a blotchy, blurred line. These can be disruptive for subsequent image processing in measurement applications or → laser triangulation systems.
The accident prevention regulations UVV “Electrical Installations and Equipment” (BGV A2/VBG 4), UVV “Laser Radiation” (BGV B2/VBG 93), and UVV “Safety Signaling at the Workplace” (BGV A8/VBG 125) must be observed when using lasers in Germany.
← WikiLED A–Z
WikiLED · LED-Glossar
Laser
English for "Light Amplification by Stimulated Emission of Radiation," light amplification by stimulated emission of radiation. With laser lighting, special types of illumination such as structured lighting can be achieved for industrial image processing ...