CORONA-L Washdown

Washdown / Hygienic Beleuchtungen

CORONA-L Washdown

  • Außen-/Innendurchmesser: 166/81mm
  • Anstellwinkel der LED-Flächen 45°
  • optional Edelstahlgehäuse V4A
  • Schutzart (IP): IP67
Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
166/81mm
Housing
Aluminum, silver anodized
Diffuser
PMMA
Weight
approx. 610 g
LEDs
128

Operation & Connection

Protection class (IP)
IP67
Ambient Temperature
max. 50 °C recommended
electrical protection class
III, safety extra-low voltage operation
Connection
M8 connector (4-pin) stainless steel*
Versorgung
24 VDC type: 24 VDC SC-Typ: For use with a Beleuchtungscontroller
Compliance
CE, RoHS
service life
The service life of LEDs is in the range of several 10.000 to 100.000 hours and is generally very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °Current consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,15 m
Approximate values
Electrical powerWRisk groupEN 62471
Red617 nm30°430 mA1,6 A20 - 130 W/m²11 Wexempt group
Red617 nm60°430 mA1,6 A10 - 65 W/m²11 Wexempt group
Red617 nm120°350 mA1,6 A17 W/m²9 Wexempt group
white5.500 K120°410 mA1,6 A23 W/m²10 Wexempt group
Infrared850 nm30°430 mA6,4 A25 - 100 W/m²11 Wexempt group
Infrared850 nm50°430 mA6,4 A12 - 50 W/m²11 Wexempt group
Infrared850 nm120°430 mA6,4 A–11 Wexempt group

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing CORONA-L Washdown
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – CORONA-L Washdown

Product inquiry

CORONA-L Washdown check for your application

Briefly describe your Prüfaufgabe.

Product: CORONA-L Washdown

PDF Datasheet · Version 4.0

Select datasheet

CORONA-L Washdown

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.