KOAX-One 76-57

Koaxialbeleuchtungen

KOAX-One 76-57

  • Leuchtfläche: 76 x 57 mm²
  • Sensorverhältnis: 4:3
  • Für hochauflösende Objektive geeignet

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Leuchtfläche
76 x 57 mm²
Housing
Aluminum black anodized/ Aluminum, black anodised
Weight
approx. 490 g

Additional Technical Specifications

Sensor ratio
4:3

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
Ambient Temperature
max. 50 °C recommended
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesElectrical powerWRisk groupEN 62471
white5.200 K120°1520 mA13 Wexempt group
Green525 nm120°1520 mA13 Wexempt group
Red633 nm–1–––
Blue470 nm–1–––

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
2whitewhitenc
3blueblue-
4blackblacknc
04

Dimensional drawing

Dimensional drawing KOAX-One 76-57
05

Operating instructions

Areas of application

Depending on the version, the lights are designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)
  • brightness-controlled operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply. The LED current can be increased by a maximum factor of 2 to 3 in flash operation.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Product inquiry

KOAX-One 76-57 check for your application

Briefly describe your Prüfaufgabe.

Product: KOAX-One 76-57

PDF Datasheet · Version 4.0

Select datasheet

KOAX-One 76-57

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.