RONDO-MX

Ringbeleuchtungen

RONDO-MX

  • Außen-/Innendurchmesser: ca. 84,6 / 39,5 mm
  • Montage: M43x0,75
  • IP51, optional IP65
  • Optional: 2 LED-Ringe getrennt steuerbar

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
approx. 84,6 / 39,5 mm
Mounting
M43x0,75
Housing
Milled aluminum, silver anodized
Diffuser
PMMA
Weight
approx. 135 g
LEDs
56

Additional Technical Specifications

Optional
2 LED-Ringe getrennt steuerbar
Filter thread
M43x0,75

Operation & Connection

Electrical versions and connections
  • 24 VDC · 2-channelM8 Connector 4-pin
  • SC · 2-channelM8 Connector 4-pin
  • 24 VDC · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
IP51, optional IP65
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LEDs is in the range of several 10.000 to 100.000 hours and is generally very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,15 m
Approximate values · Distance from bottom edge of housing
Electrical powerWRisk groupEN 62471
Red635 nm120°1200 mA700 mA13 W/m²5 Wexempt group
Red617 nm60°1195 mA700 mA27 W/m²5 Wexempt group
Red617 nm30°1195 mA700 mA36 W/m²5 Wexempt group
White5.200 K120°1220 mA700 mA14 W/m²6 Wexempt group
Infrared850 nm120°1200 mA2800 mA12 W/m²5 Wexempt group
Infrared850 nm50°1200 mA2800 mA33 W/m²5 Wexempt group
Infrared850 nm30°1200 mA2800 mA44 W/m²5 WRG1
Blue470 nm120°1200 mA1800 mA8 W/m²5 WRG1
Blue470 nm30°1230 mA980 mA28 W/m²6 WRG2
Green525 nm120°––––––
Green525 nm30°––––––
Violet400 nm120°––––––
UV375 nm120°––––––
Red635 nm120°2100 mA / Kanal350 mA / Kanal13 W/m²5 Wexempt group
Red617 nm60°297,5 mA / Kanal350 mA / Kanal27 W/m²5 Wexempt group
Red617 nm30°297,5 mA / Kanal350 mA / Kanal36 W/m²5 Wexempt group
White5.200 K120°2110 mA / Kanal350 mA / Kanal14 W/m²6 Wexempt group
Infrared850 nm120°2100 mA / Kanal1400 mA / Kanal12 W/m²5 Wexempt group
Infrared850 nm50°2100 mA / Kanal1400 mA / Kanal33 W/m²5 Wexempt group
Infrared850 nm30°2100 mA / Kanal1400 mA / Kanal44 W/m²5 WRG1
Blue470 nm120°2100 mA / Kanal900 mA / Kanal8 W/m²5 WRG1
Blue470 nm30°2115 mA / Kanal490 mA / Kanal28 W/m²6 WRG2

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 2-channel · common anode

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue- Kanal 1 / Channel 1
4blackblack- Kanal 2 / Channel 2

M8 Connector 4-pin · SC · 2-channel · common anode

Connector drawing

Front view of housing

PINFarbeWire colorFunction
4blackblack+
3blueblue- Kanal 1 / Channel 1
2whitewhite- Kanal 2 / Channel 2

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing RONDO-MX
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – RONDO-MX

Product inquiry

RONDO-MX check for your application

Briefly describe your Prüfaufgabe.

Product: RONDO-MX

PDF Datasheet · Version 4.0

Select datasheet

RONDO-MX

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.