HELIOS-95 Washdown

Washdown / Hygienic Beleuchtungen

HELIOS-95 Washdown

  • Außen-/Innendurchmesser: 99 / 36 mm
  • 16 High-Power LEDs
  • Schutzart (IP): IP67
  • Optional: Edelstahl V4A
Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
99 / 36 mm
Housing
Milled aluminum, silver anodized
Diffuser
PMMA
Weight
277 g
LEDs
16

Additional Technical Specifications

Optional
Stainless steel V4A

Operation & Connection

Protection class (IP)
IP67
Ambient Temperature
max. 50 °C recommended
electrical protection class
III, safety extra-low voltage operation
Connection
M8 connector (4-p.) stainless steel*
Versorgung
24 VDC type: 24 VDC SC-Typ: For use with a Beleuchtungscontroller
Compliance
CE, RoHS
service life
The service life of LED lighting depends on many factors.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °Current consumption24VDC type / max. Konstantstrom SC-TypMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
24 VDC und SC
IrradianceW/m² at constant currentElectrical powerWRisk groupEN 62471
Red625 nm80°450 mA3,2 A–11 Wexempt group
Red625 nm45°450 mA3,2 A–11 Wexempt group
Red625 nm36°450 mA3,2 A–11 Wexempt group
Red625 nm23°450 mA3,2 A–11 Wexempt group
Red625 nm16°450 mA3,2 A–11 Wexempt group
White5000 K80°450 mA8 A80 W/m²11 W1
White5000 K45°450 mA8 A–11 W1
White5000 K36°450 mA8 A–11 W1
White5000 K23°450 mA8 A–11 W1
White5000 K16°450 mA8 A–11 W1
Infrared850 nm80°450 mA9,6 A–11 W1
Infrared850 nm45°450 mA9,6 A–11 W1
Infrared850 nm36°450 mA9,6 A–11 W1
Infrared850 nm24°450 mA9,6 A–11 W2
Infrared850 nm16°450 mA9,6 A–11 W–
Blue470 nm80°450 mA––11 W–
Blue470 nm45°450 mA––11 W–
Blue470 nm36°450 mA––11 W–
Blue470 nm23°450 mA––11 W–
Blue470 nm16°450 mA––11 W–
Green525 nm80°450 mA––11 W–
Green525 nm45°450 mA––11 W–
Green525 nm36°450 mA––11 W–
Green525 nm23°450 mA––11 W–
Green525 nm16°450 mA––11 W–

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V (~3mA) - 24V (~30mA) / OFF: < 3,0V

M8 Connector 6-pin · 24VDC · 4-channel

4-channel · 24VDC · 4-channel · common anode · M8 Stecker 6-pin

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue- Kanal 1 / Channel 1
4blackblack- Kanal 2 / Channel 2
5greygrey- Kanal 3 / Channel 3
6pinkpink- Kanal 4 / Channel 4

M8 Connector 6-pin · SC · 4-channel

4-channel · SC · 4-channel · common anode · M8 Stecker 6-pin

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue- Kanal 1 / Channel 1
2whitewhite- Kanal 2 / Channel 2
5greygrey- Kanal 3 / Channel 3
6pinkpink- Kanal 4 / Channel 4
04

Dimensional drawing

Dimensional drawing HELIOS-95 Washdown
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – HELIOS-95 Washdown

Product inquiry

HELIOS-95 Washdown check for your application

Briefly describe your Prüfaufgabe.

Product: HELIOS-95 Washdown

PDF Datasheet · Version 4.0

Select datasheet

HELIOS-95 Washdown

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.