I-SWITCH

Beleuchtungscontroller / Blitzsteuerung

I-SWITCH

  • PNP- oder NPN-Version
  • Ansteuerung: 3,7–24 V
  • Max. Laststrom: 2,5 A
Inquire about product →Datasheet as PDF →
Controller passend zur Betriebsart wählen

Bei 24-VDC-Ausführungen ist für den Dauerbetrieb kein Beleuchtungscontroller erforderlich. Ein Controller kann optional zur Helligkeitsregelung oder für besondere Schalt- und Blitzfunktionen eingesetzt werden. SC-Ausführungen benötigen einen geeigneten Beleuchtungscontroller oder eine Stromquelle mit Strombegrenzung.

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Weight
approx. 24 g

Additional Technical Specifications

Control
3,7–24 V

Supply & Output Power

Max. load current
2,5 A
Connection
M8, 4-pin
Versorgung
24 VDC
02

Electrical characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantElectrical characteristics
variantSupply VoltageContinuous current (output)
S-0013 – NPN / active-low24 VDCmax. 2,5 A
S-0012 – PNP / active-high24 VDCmax. 2,5 A

Notes on the specifications table

Input and output are not galvanically isolated. The NPN version switches at 0 V, the PNP version at high level.

PNP control: 3,7–24 V; at least 3 mA at 3,7 V to maximum 30 mA at 24 V. Typical turn-on time 1,1 ms, typical turn-off time 0,25 ms.

Housing body dimensions (L × W × H): 35 × 15 × 15 mm. Pigtail: 10 cm; other lengths on request.

03

Connection and PIN assignment

M8 Built-in connector / pigtail coupling 4-pin · I-SWITCH · active-low NPN · wire assignment

1-kanalig · I-SWITCH · active-low NPN · Aderzuordnung · M8 Einbaustecker / Pigtail-Kupplung 4-polig

See table for Anschlussbelegung.

Wiring by wire colors according to original

PINFarbeWire colorFunction
Input brownbrownbrown+24V
Input whitewhitewhitenot connected (n.c.)
Input blackblackblackSwitching input NPN active-low
Input blueblueblue0V
Output brownbrownbrownLighting +
Output whitewhitewhitenot connected (n.c.)
Output blackblackblacknot connected (n.c.)
Output blueblueblueLighting -

Wiring by wire colors: The original does not state PIN numbers; these were not supplemented from a standard pinout. Input and output are not electrically isolated. NPN: active when control input is set to 0V. PNP: active at high level; permissible range according to data sheet 3,7–24V.

M8 Built-in connector / pigtail coupling 4-pin · I-SWITCH · active-high PNP · wire assignment

1-kanalig · I-SWITCH · active-high PNP · Aderzuordnung · M8 Einbaustecker / Pigtail-Kupplung 4-polig

See table for Anschlussbelegung.

Wiring by wire colors according to original

PINFarbeWire colorFunction
Input brownbrownbrown+24V
Input whitewhitewhitenot connected (n.c.)
Input blackblackblackSwitching input PNP active-high
Input blueblueblue0V
Output brownbrownbrownLighting +
Output whitewhitewhitenot connected (n.c.)
Output blackblackblacknot connected (n.c.)
Output blueblueblueLighting -

Wiring by wire colors: The original does not state PIN numbers; these were not supplemented from a standard pinout. Input and output are not electrically isolated. NPN: active when control input is set to 0V. PNP: active at high level; permissible range according to data sheet 3,7–24V.

04

Dimensional drawing

Dimensional drawing I-SWITCH – I-SWITCH
05

Operating instructions

The I-SWITCH allows for simple and fast switching of 24VDC high-power LED lights via a small control current. The module is equipped with M8 plugs (4-pin) as standard and can be easily looped into the connection between the DC power supply and the lighting. Only the control signal must be applied to the black line. The input and output sides of the switch are not galvanically isolated! The active-low version (NPN) switches the output active as long as the control input is pulled to 0V. The positive side of the switch is internally connected to the supply pin (+24V). Art. No. S-0013 The active-high version (PNP) switches the output active as long as the control input is pulled high. The negative side of the switch is internally connected to the 0V pin. Art. No. S-0012

Product inquiry

I-SWITCH check for your application

Briefly describe your Prüfaufgabe.

Product: I-SWITCH

PDF Datasheet · Version 4.0

Select datasheet

I-SWITCH

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.