LIGHTPIN-Telecentric

Koaxialbeleuchtungen

LIGHTPIN-Telecentric

  • Gehäusemaß: ca. 33 x 49 x 33 mm³
  • Lichtaustritt: ca. 8 mm
  • High-Power LED-System
Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Housing dimensions
approx. 33 x 49 x 33 mm³
Housing
Aluminum natural anodized
Weight
approx. 84 g
LEDs
1 High-Power-LED

Additional Technical Specifications

Light emission
approx. 8 mm

Operation & Connection

Ambient Temperature
max. 50 °C recommended
Connection
M8 connector (4-pin)
Versorgung
7 - 35 VDC SC-Typ: For use with a controller
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KvariantCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
SC version · Depending on flash conditions
IrradianceW/m² at constant currentApproximate values · Measurement directly on the diffuserElectrical powerWRisk groupEN 62471
Red625 nmSingle color24 VDC: 120 mA / SC: 520 mA2,0 A4000 W/m²13 Wexempt group
Green525 nmSingle color24 VDC: 100 mA / SC: 520 mA2,0 A387 W/m²13 Wexempt group
Blue470 nmSingle color24 VDC: 100 mA / SC: 520 mA2,0 A1900 W/m²13 Wexempt group
White5500 KSingle color24 VDC: 110 mA / SC: 520 mA2,0 A2450 W/m²13 Wexempt group
Infrared850 nmSingle color24 VDC: 90 mA / SC: 520 mA2,0 A800 W/m²13 Wexempt group
RGB – Red630 nmRGB (SC type only)350 mA650 mA150 W/m²9 W je Lichtfarbeexempt group
RGB – Green530 nmRGB (SC type only)350 mA650 mA130 W/m²9 W je Lichtfarbeexempt group
RGB – Blue470 nmRGB (SC type only)350 mA650 mA300 W/m²9 W je Lichtfarbeexempt group

Notes on the specifications table

RGB is only available as an SC version.

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V - 24V / OFF: < 3,0V

04

Dimensional drawing

Dimensional drawing LIGHTPIN-Telecentric
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Product inquiry

LIGHTPIN-Telecentric check for your application

Briefly describe your Prüfaufgabe.

Product: LIGHTPIN-Telecentric

PDF Datasheet · Version 4.0

Select datasheet

LIGHTPIN-Telecentric

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.