All semiconductors, including LEDs, generate heat as a byproduct of their operation. The more current the component consumes, the more heat must be dissipated. If adequate thermal management is in place, the component will not exceed its maximum operating temperature.
If the heat dissipation measures are insufficient, overheating occurs. In this case, the ability to conduct current increases, generating even more heat. The increased heat emission leads to an even higher temperature, which further increases the ability to conduct current. This process, known as thermal runaway (thermisches Durchgehen), continues until the component destroys itself.
Thermal runaway is controlled through the use of a constant current controller or LED driver.
← WikiLED A–Z
WikiLED · LED-Glossar
Thermal Runaway
All semiconductors, including LEDs, generate heat as a byproduct of their operation. The more current the component consumes, the more heat must be dissipated. If adequate thermal management is in place, …