Due to the diode characteristic curve of LEDs even a small change in the supply voltage results in a large change in the diode current. Additionally, the diode characteristic curve depends on the temperature of the LEDs. Therefore, an LED operated with excessive voltage without current limiting can quickly destroy itself (Thermal Runaway).
For this reason, LED lighting systems are operated almost exclusively with a constant current. This can be implemented with losses and to a certain extent voltage-dependently by means of series resistors, or with more technical effort but more efficiently and with voltage stability using appropriate controllers.
The simplest variants for this are special LED drivers or constant current sources. These usually provide a fixed standard current value and often additionally offer the possibility to dim the PWM signal or control voltage of the LED lighting .
Low-power LED drivers are often designed as controllable resistors. These work similarly to the previously mentioned series resistors, but without the constant current depending on the supply voltage.
Higher-power LED drivers are often designed as switching regulators. These are significantly more complex than the previously mentioned methods and usually require a much larger installation space. In return, they can achieve an efficiency of well over 90%.
The high-end variant is the fully integrated lighting controller. Here, an adjustable constant current regulator is linked with a user control system so that the lighting properties can be configured via digital communication protocols or web interfaces.
← WikiLED A–Z
WikiLED · LED-Glossar
LED Drivers
Due to the diode characteristic curve of LEDs, even a small change in the supply voltage results in a large change in the diode current. Additionally, the diode characteristic curve depends on the temperature of the LEDs. ...