SPOT-ONE

Spotbeleuchtungen

SPOT-ONE

  • Gehäusemaß: 51 x 62 mm
  • High-Power LED-System

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Housing dimensions
51 x 62 mm
Housing
Aluminum black anodized
Front / Cover
clear arf
Weight
approx. 215g
LEDs
1

Origin & Customs

Customs tariff number / Country of origin
853 951 00

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
Ambient Temperature
max. 50°C recommended
Protection class (IP)
IP65
Compliance
CE, RoHS
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °Lens / versionChannelsRisk groupEN 62471
Red625 nm5°S12
Red625 nm16°RS10
Red625 nm23°M10
Red625 nm36°W10
Green525 nm5°S13
Green525 nm16°RS12
Green525 nm23°M12
Green525 nm36°W12
Blue470 nm5°S13
Blue470 nm16°RS12
Blue470 nm23°M12
Blue470 nm36°W12
White5.000 K5°S13
White5.000 K16°RS12
White5.000 K23°M12
White5.000 K36°W12
Infrared850 nm5°S13
Infrared850 nm16°RS13
Infrared850 nm23°M12
Infrared850 nm36°W12
450 nm450 nm80°–1–
03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V - 24V / OFF: < 3,0V

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing SPOT-ONE
05

Operating instructions

Areas of application

Depending on the version, the lights are designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

For flash, switched, or brightness-controlled operation, the lighting is optionally available as an SC version optimized for flash operation. They can be used in combination with our IPSC series controllers or with Gardasoft controllers and enable optimized or maximum current, especially in pulse mode. We would be happy to advise you on the selection of suitable components.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – SPOT-ONE

Product inquiry

SPOT-ONE check for your application

Briefly describe your Prüfaufgabe.

Product: SPOT-ONE

PDF Datasheet · Version 4.0

Select datasheet

SPOT-ONE

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.