DOME-325

Dombeleuchtungen

DOME-325

  • Außen-/Innendurchmesser: 325/260mm
  • bis zu 8 Segmente getrennt ansteuerbar
  • 32 High-Power-LEDs
  • äußerst homogene Dome-Beleuchtung
  • Objektivöffnung 50mm

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
325/260mm
Housing
Anodized aluminum, high-quality plastic
Weight
approx. 1810 g
LEDs
32

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM12 Connector 5-pin
  • 24 VDC with switching input · 1-channelM12 Connector 5-pin
  • SC · 1-channelM12 Connector 5-pin
  • 24 VDC · 4-channelM12 Connector 5-pin
  • SC · 4-channelM12 Connector 5-pin
  • 24 VDC · 4-channelM12 Connector 17-pin
  • SC · 4-channelM12 Connector 17-pin
  • 24 VDC · 8-channelM12 Connector 17-pin
  • SC · 8-channelM12 Connector 17-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
depending on version
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,01 m
Approximate values · Distance from bottom edge of housing
Electrical powerWRisk groupEN 62471
white5.200 K120°11250 mA9500 mA45 W/m²30 Wexempt group
Infrared850 nm120°–––––exempt group
Blue470 nm120°–––––exempt group
Red617 nm–––––––
Green525 nm–––––––
RGB–120°––––––
white5.200 K120°4312,5 mA / Kanal2375 mA / Kanal45 W/m²30 Wexempt group
white5.200 K120°8156,25 mA / Kanal1187,5 mA / Kanal45 W/m²30 Wexempt group

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M12 Connector 5-pin · 24VDC · 1-channel

See table for Anschlussbelegung.

Front view of housing

PINFarbeWire colorFunction
1brownbrown+24 V
2––unconnected
3blueblueMinus
4––unconnected
5––unconnected

M12 Connector 5-pin · 24VDC · 4-channel · common anode

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
2whitewhite- Kanal 1 / Channel 1
3blackblack- Kanal 2 / Channel 2
4blueblue- Kanal 3 / Channel 3
5greygrey- Kanal 4 / Channel 4

M12 Connector 5-pin · SC · 4-channel · common anode

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1blackblack+
2––- Kanal 1 / Channel 1
3––- Kanal 2 / Channel 2
4––- Kanal 3 / Channel 3
5––- Kanal 4 / Channel 4
04

Dimensional drawing

Dimensional drawing DOME-325 – DOME-325: all views
05

Operating instructions

Areas of application

Depending on the version, the lights are designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)
  • brightness-controlled operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply. The LED current can be increased by a maximum factor of 2 to 3 in flash operation.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

For flash, switched, or brightness-controlled operation, the lighting is optionally available as an SC version optimized for flash operation. They can be used in combination with our IPSC series controllers or with Gardasoft controllers and enable optimized or maximum current, especially in pulse mode. We would be happy to advise you on the selection of suitable components.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – DOME-325

Ausführungen and Segmentsteuerung

Ausführungen and Segmentsteuerung – DOME-325

Product inquiry

DOME-325 check for your application

Briefly describe your Prüfaufgabe.

Product: DOME-325

PDF Datasheet · Version 4.0

Select datasheet

DOME-325

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.