DOME-170

Dombeleuchtungen

DOME-170

  • Außen-/Innendurchmesser: 170/114mm
  • bis zu 16 Segmente getrennt ansteuerbar
  • äußerst homogene Dome-Beleuchtung
  • Objektivöffnung mit Wunschdurchmesser 14-36mm
  • Dauer-, Schalt- oder Blitzbetrieb

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
170/114mm
Housing
Anodized aluminum, high-quality plastic
Weight
approx. 655 g
LEDs
64

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
  • 24 VDC · 4-channelM8 Connector 6-pin
  • SC · 4-channelM8 Connector 6-pin
  • 24 VDC · 8-channelM12 Connector 17-pin
  • SC · 8-channelM12 Connector 17-pin
  • 24 VDC · 16-channelM12 Connector 17-pin
  • SC · 16-channelM12 Connector 17-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
depending on version
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
IrradianceW/m² at constant current
@ 0,01 m
Distance from Gehäuseunterkante
Electrical powerWRisk groupEN 62471
Red635 nm120°1200 mA800 mA33 W/m²5 Wexempt group
white5.200 K120°1240 mA800 mA40 W/m²6 Wexempt group
Infrared850 nm120°1200 mA3200 mA34 W/m²5 Wexempt group
Blue470 nm120°1350 mA2000 mA37 W/m²9 Wexempt group
HP blue470 nm120°1600 mA1440 mA160 W/m²15 WRG 2
Green525 nm–––––––
Red635 nm120°450 mA / Kanal200 mA / Kanal33 W/m²5 Wexempt group
Red635 nm120°825 mA / Kanal100 mA / Kanal33 W/m²5 Wexempt group
Red635 nm120°1612,5 mA / Kanal50 mA / Kanal33 W/m²5 Wexempt group
white5.200 K120°460 mA / Kanal200 mA / Kanal40 W/m²6 Wexempt group
white5.200 K120°830 mA / Kanal100 mA / Kanal40 W/m²6 Wexempt group
white5.200 K120°1615 mA / Kanal50 mA / Kanal40 W/m²6 Wexempt group
Infrared850 nm120°450 mA / Kanal800 mA / Kanal34 W/m²5 Wexempt group
Infrared850 nm120°825 mA / Kanal400 mA / Kanal34 W/m²5 Wexempt group
Infrared850 nm120°1612,5 mA / Kanal200 mA / Kanal34 W/m²5 Wexempt group
Blue470 nm120°487,5 mA / Kanal500 mA / Kanal37 W/m²9 Wexempt group
Blue470 nm120°843,75 mA / Kanal250 mA / Kanal37 W/m²9 Wexempt group
Blue470 nm120°1621,875 mA / Kanal125 mA / Kanal37 W/m²9 Wexempt group
HP blue470 nm120°4150 mA / Kanal360 mA / Kanal160 W/m²15 WRG 2
HP blue470 nm120°875 mA / Kanal180 mA / Kanal160 W/m²15 WRG 2

Notes on the specifications table

Measurement conditions according to datasheet_DOME-170_V3.2_de_en.pdf:

Page 1 – Characteristics:

Current consumption 24VDC-type ** / max. constant current SC-type **

max. pulse current 24VDC-type/ SC-type (t <1ms) *** on 24VDC<1ms

Beleuchtungsstärke **** Illumination Intensity ****

Power consumption at 24VDC Current demand at 24VDC

**** weitere Farben und Ausführungen von UV bis Infrarot auf Anfrage / other colours and types from UV to infrared on request **** angegebene Stromwerte sind als ungefähre Werte zu verstehen / stated current values should be considered as approximate values **** abhängig von den Blitzkonditionen / depending on the strobe conditions **** Cirka-Angaben im DC-Betrieb; Messabstand 10mm unter Gehäuseunterkante / approx. data in DC mode, Measuring distance 10mm below housing

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue- (Kanal 1 / Channel 1)

Exclusively einkanalig Ausführung: PIN 1 is +24V, PIN 3 is minus (channel 1). The connection to PIN 4 shown in parentheses in the original is not part of this Anschlussbelegung. Its German and English channel numbers contradict each other; technical clarification is still required for mehrkanalig use.

M8 Connector 4-pin · SC · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
4blackblack+
3blueblue- (Kanal 1 / Channel 1)

Single-channel version: PIN 4 is positive, PIN 3 is negative (channel 1). The optional second channel at PIN 2 shown in brackets in the original does not belong to this single-channel assignment. The separate two-channel profile applies to the two-channel version.

04

Dimensional drawing

Dimensional drawing DOME-170
05

Operating instructions

Areas of application

Depending on the version, the lights are designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)
  • brightness-controlled operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply. The LED current can be increased by a maximum factor of 2 to 3 in flash operation.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

For flash, switched, or brightness-controlled operation, the lighting is optionally available as an SC version optimized for flash operation. They can be used in combination with our IPSC series controllers or with Gardasoft controllers and enable optimized or maximum current, especially in pulse mode. We would be happy to advise you on the selection of suitable components.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

24VDC type

Depending on the version, the lights are designed for continuous operation at 24VDC. The following operating modes are possible:

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)
  • brightness-controlled operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply
  • Flash operation via controller (IPSC or Gardasoft) in conjunction with a suitable power supply. The LED current can be increased by a maximum factor of 2 to 3 in flash operation.

SC type

For flash, switched, or brightness-controlled operation, the lighting is optionally available as an SC version optimized for flash operation. They can be used in combination with our IPSC series controllers or with Gardasoft controllers and enable optimized or maximum current, especially in pulse mode. We would be happy to advise you on the selection of suitable components.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – DOME-170

Ausführungen and Segmentsteuerung

Ausführungen and Segmentsteuerung – DOME-170

Product inquiry

DOME-170 check for your application

Briefly describe your Prüfaufgabe.

Product: DOME-170

PDF Datasheet · Version 4.0

Select datasheet

DOME-170

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.