MAGNUM-X

Spotbeleuchtungen

MAGNUM-X

  • Gehäusemaß: 100 x 100 x 40mm
  • extrem lichtstarkes High-Power LED-System
  • verschiedene Vorsatzlinsen (7°, 15°, 20°) verfügbar
  • unterschiedliche Fronten/Diffusoren erhältlich
Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Housing dimensions
100 x 100 x 40mm
Housing
Milled aluminum, matte bead-blasted, silver anodized
Diffuser
PMMA
Weight
approx. 430 g
LEDs
8 High-Power LEDs

Operation & Connection

Ambient Temperature
max. 50 °C recommended
Protection class (IP)
IP50 Ip50
electrical protection class
III, safety extra-low voltage operation
Connection
M8 connector (4-pin)
Versorgung
24 VDC type / 24 V type with integrated Schalteingang: 24 VDC SC-Typ: For use with a Beleuchtungscontroller, see operating modes section
Compliance
CE, RoHS
service life
The service life of LED lighting depends on many factors.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KLens / versionCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant currentApproximate values · Measurement directly on the diffuserElectrical powerWRisk groupEN 62471
Red617 nmN280 mA1700 mA120 W/m²7 W–
Red617 nmM280 mA1700 mA–7 Wexempt group
Red617 nmW280 mA1700 mA–7 Wexempt group
White6500 KN570 mA3800 mA–14 Wexempt group
White6500 KM570 mA3800 mA104 W/m²14 Wexempt group
White6500 KW570 mA3800 mA–14 Wexempt group
Infrared850 nmN325 mA2400 mA185 W/m²8 Wexempt group
Infrared850 nmM325 mA2400 mA–8 Wexempt group
Infrared850 nmW325 mA2400 mA–8 Wexempt group

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V (3mA) - 24V (30mA) / OFF: < 2,5V

04

Dimensional drawing

Dimensional drawing MAGNUM-X
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – MAGNUM-X

Product inquiry

MAGNUM-X check for your application

Briefly describe your Prüfaufgabe.

Product: MAGNUM-X

PDF Datasheet · Version 4.0

Select datasheet

MAGNUM-X

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.