RONDO-LX

Ringbeleuchtungen

RONDO-LX

  • Außen-/Innendurchmesser: ca. 101 / 67 mm
  • Optional: 4 LED-Segmente
  • Montage: M72x0,75

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
approx. 101 / 67 mm
Mounting
M72x0,75
Housing
Milled aluminum, silver anodized
Diffuser
PMMA
Weight
approx. 160 g
LEDs
32 / 30 for RGB

Additional Technical Specifications

Optional
4 LED segments
Filter thread
M72x0,75

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
  • 24 VDC · 1-channelM8 Connector 6-pin
  • SC · 1-channelM8 Connector 6-pin
  • 24 VDC · 4-channelM8 Connector 6-pin
  • SC · 4-channelM8 Connector 6-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
depending on version, IP65 optional
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LED lighting depends on many factors.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,2 m
Approximate values · Distance from bottom edge of housing
Electrical powerWRisk groupEN 62471
Red635 nm120°1105 mA400 mA9 W/m²3 Wexempt group
Red617 nm60°1175 mA400 mA30 W/m²5 Wexempt group
Red617 nm30°1175 mA400 mA35 W/m²5 Wexempt group
White5.200 K120°1180 mA400 mA11 W/m²5 W–
Infrared850 nm120°1220 mA1.600 mA13 W/m²6 W–
Infrared850 nm50°1240 mA1.600 mA37 W/m²6 W–
Infrared850 nm30°1240 mA1.600 mA41 W/m²6 W–
Blue470 nm120°1205 mA1.000 mA7,6. W/m²5 W–
Blue470 nm30°1210 mA1.040 mA22 W/m²6 W–
Green525 nm120°1–––––
Green525 nm30°1–––––
UV375 nm120°1300 mA–11,2 W/m²8 W–
RGB630 nm120°190 mA je Lichtfarbe; max. 200 mA gesamt500 mA pro Farbe3 W/m²5 W gesamt (max.); 3 W je Lichtfarbe–
RGB530 nm120°190 mA je Lichtfarbe; max. 200 mA gesamt500 mA pro Farbe3 W/m²5 W gesamt (max.); 3 W je Lichtfarbe–
RGB470 nm120°190 mA je Lichtfarbe; max. 200 mA gesamt500 mA pro Farbe6 W/m²5 W gesamt (max.); 3 W je Lichtfarbe–
Red635 nm120°430 mA / Kanal100 mA / Kanal7,3 W/m²3 W–
Red617 nm60°445 mA / Kanal100 mA / Kanal24 W/m²5 W–
Red617 nm30°443,75 mA / Kanal100 mA / Kanal35 W/m²5 W–
White5.200 K120°445 mA / Kanal100 mA / Kanal9 W/m²5 W–
Infrared850 nm120°455 mA / Kanal400 mA / Kanal13 W/m²6 W–
Infrared850 nm50°450 mA / Kanal400 mA / Kanal36 W/m²5 W–
Infrared850 nm30°460 mA / Kanal400 mA / Kanal41 W/m²6 W–
Blue470 nm120°451,25 mA / Kanal250 mA / Kanal7,6. W/m²5 W–
Blue470 nm30°452,5 mA / Kanal260 mA / Kanal22 W/m²6 W–
Green525 nm120°4–––––
Green525 nm30°4–––––
UV375 nm120°475 mA / Kanal–11,2 W/m²8 W–

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing RONDO-LX
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Technical Notes

Technical Notes – RONDO-LX

Ausführungen and Segmentsteuerung

Ausführungen and Segmentsteuerung – RONDO-LX

Application and light guidance

Application and light guidance – RONDO-LX

Product inquiry

RONDO-LX check for your application

Briefly describe your Prüfaufgabe.

Product: RONDO-LX

PDF Datasheet · Version 4.0

Select datasheet

RONDO-LX

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.