CORONA-L

Ringbeleuchtungen

CORONA-L

  • Außen-/Innendurchmesser: ca. 153 / 96 mm
  • LED-Flächen: produktionsseitig 0° bis 45° anwinkelbar
  • Schutzart (IP): IP54
  • LEDs: 128

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
approx. 153 / 96 mm
LED arrays
can be angled from 0° to 45° during production
LEDs
128
Housing
Aluminum, silver anodized
Diffuser
PMMA
Weight
approx. 458 g
Mounting
8x M4x6 blind mounting thread

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
  • 24 VDC · 4-channelM8 Connector 6-pin
  • SC · 4-channelM8 Connector 6-pin
  • 24 VDC · 8-channelM12 Connector 17-pin
  • SC · 8-channelM12 Connector 17-pin
Protection class (IP)
IP54
Ambient Temperature
max. 50 °C recommended
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LED lighting depends on many factors.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,2 m
Approximate values · Distance from bottom edge of housing
Electrical powerWRisk groupEN 62471
Red635 nm120°1440 mA1.600 mA20-29 W/m²11 Wexempt group
Red617 nm60°1430 mA1.600 mA38-53 W/m²11 Wexempt group
Red617 nm30°1430 mA1.600 mA20-103 W/m²11 Wexempt group
White5.200 K120°1460 mA1.600 mA21 W/m²12 Wexempt group
Infrared850 nm120°1445 mA6.400 mA21 W/m²11 Wexempt group
Infrared850 nm50°1430 mA6.400 mA43-48 W/m²11 Wexempt group
Infrared850 nm30°1445 mA6.400 mA25-75 W/m²11 Wexempt group
Blue470 nm120°1––––exempt group
Blue470 nm30°1––––exempt group
Green525 nm120°1––––exempt group
Green525 nm30°1430 mA1.600 mA33 W/m²11 Wexempt group
Red635 nm120°4110 mA / Kanal400 mA / Kanal20-29 W/m²11 Wexempt group
Red617 nm60°4107,5 mA / Kanal400 mA / Kanal38-53 W/m²11 Wexempt group
Red617 nm30°4107,5 mA / Kanal400 mA / Kanal20-103 W/m²11 Wexempt group
White5.200 K120°4115 mA / Kanal400 mA / Kanal21 W/m²12 Wexempt group
Infrared850 nm120°4111,25 mA / Kanal1600 mA / Kanal21 W/m²11 Wexempt group
Infrared850 nm50°4107,5 mA / Kanal1600 mA / Kanal43-48 W/m²11 Wexempt group
Infrared850 nm30°4110 mA / Kanal1.600 mA / Kanal25-90 W/m²11 Wexempt group
Blue470 nm120°4––––exempt group
Blue470 nm30°4––––exempt group
Green525 nm120°4––––exempt group
Green525 nm30°4115 mA / Kanal560 mA / Kanal23 W/m²12 Wexempt group
Red635 nm120°860 mA / Kanal200 mA / Kanal29 W/m²12 Wexempt group
Red617 nm60°855 mA / Kanal200 mA / Kanal45 W/m²11 Wexempt group
Red617 nm30°860 mA / Kanal200 mA / Kanal62-93 W/m²12 Wexempt group
White5.200 K120°855 mA / Kanal200 mA / Kanal19-21 W/m²11 Wexempt group
Infrared850 nm120°855,625 mA / Kanal800 mA / Kanal21 W/m²11 Wexempt group
Infrared850 nm50°853,75 mA / Kanal800 mA / Kanal43-48 W/m²11 Wexempt group
Infrared850 nm30°855 mA / Kanal800 mA / Kanal28-90 W/m²11 Wexempt group
Blue470 nm120°8––––exempt group
Blue470 nm30°8––––exempt group
Green525 nm120°8––––exempt group
Green525 nm30°853,75 mA / Kanal200 mA / Kanal33 W/m²11 Wexempt group

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

The four-channel CORONA-L allows for the separate control of four segments.

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

The four-channel CORONA-L allows for the separate control of four segments.

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V (~3mA) - 24V (~30mA) / OFF: < 3,0V

The four-channel CORONA-L allows for the separate control of four segments.

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing CORONA-L
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – CORONA-L

Ausführungen and Segmentsteuerung

Ausführungen and Segmentsteuerung – CORONA-L

Product inquiry

CORONA-L check for your application

Briefly describe your Prüfaufgabe.

Product: CORONA-L

PDF Datasheet · Version 4.0

Select datasheet

CORONA-L

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.