
Dunkelfeldbeleuchtungen
TOP-LINE-Serie
- Innendurchmesser: ab ca. 129/185/241mm
- vielseitig, modular und einstellbar
- jedes Modul kann einzeln angesteuert werden
- kippbare Halterung erhältlich
Specifications
Technical Specifications
General technical and commercial data
Design & Mechanics
- Inner diameter
- from approx. 129/185/241mm
- Housing
- Aluminum, black or natural anodized
- Weight
- 2HP: approx. 105 g; 3HP: approx. 160 g; 4HP: approx. 190 g
- LEDs
- 2HP: 16; 3HP: 24; 4HP: 32
Operation & Connection
- Ambient Temperature
- max. 50 °C recommended
- Protection class (IP)
- depending on version
- Connection
- M8 connector (4-pin)**
- Versorgung
- 24 VDC type or 12 VDC type: 24 VDC or 12 VDC SC-Typ: For use with a controller
- service life
- The service life of the LEDs in our lights is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
Model-dependent characteristics
Please verify that this information is up to date before use.
Model-dependent characteristics
In narrow view, the table can be shifted sideways.
| variant | Current and flash operation | Measured values and classification | |||||
|---|---|---|---|---|---|---|---|
| Light colour | Wavelength / Color Temperaturenm / K | Beam angleLED · ° | variant | Current consumption24VDC type / max. Konstantstrom SC-Typ24 VDC · approximate values | Max. pulse current24VDC type / SC-Typ t < 1 ms Duty Cycle 1:10Depending on flash conditions | IrradianceW/m² at constant current @ 0,1 mApproximate values | Electrical powerW |
| Red | 617 nm | 30° | 2TE | 70 mA | 200 mA | 25 W/m² | 2 W |
| Red | 617 nm | 30° | 3TE | 105 mA | 300 mA | 28 W/m² | 3 W |
| Red | 617 nm | 30° | 4TE | 140 mA | 400 mA | 31 W/m² | 4 W |
| Red | 617 nm | 60° | 2TE | 70 mA | 200 mA | – | 2 W |
| Red | 617 nm | 60° | 3TE | 105 mA | 300 mA | – | 3 W |
| Red | 617 nm | 60° | 4TE | 140 mA | 400 mA | 25 W/m² | 4 W |
| Red | 635 nm | 120° | 2TE | 50 mA | 200 mA | – | 2 W |
| Red | 635 nm | 120° | 3TE | 75 mA | 300 mA | – | 2 W |
| Red | 635 nm | 120° | 4TE | 100 mA | 400 mA | – | 3 W |
| Infrared | 850 nm | 30° | 2TE | 65 mA | 800 mA | 22 W/m² | 2 W |
| Infrared | 850 nm | 30° | 3TE | 95 mA | 1200 mA | – | 3 W |
| Infrared | 850 nm | 30° | 4TE | 130 mA | 1600 mA | – | 4 W |
| Infrared | 850 nm | 50° | 2TE | 65 mA | 800 mA | – | 2 W |
| Infrared | 850 nm | 50° | 3TE | 95 mA | 1200 mA | 20 W/m² | 3 W |
| Infrared | 850 nm | 50° | 4TE | 130 mA | 1600 mA | – | 4 W |
| Infrared | 850 nm | 120° | 2TE | – | 800 mA | – | – |
| Infrared | 850 nm | 120° | 3TE | – | 1200 mA | – | – |
| Infrared | 850 nm | 120° | 4TE | – | 1600 mA | – | – |
| Blue | 470 nm | 20° | 2TE | 85 mA | 320 mA | 5 W/m² | 3 W |
| Blue | 470 nm | 20° | 3TE | 125 mA | 480 mA | 5 W/m² | 3 W |
| Blue | 470 nm | 20° | 4TE | 170 mA | 640 mA | 5 W/m² | 5 W |
| UV | 375 nm | 120° | 2TE | 80 mA | – | 7 W/m² | 2 W |
| UV | 375 nm | 120° | 3TE | 110 mA | – | 7 W/m² | 3 W |
| UV | 375 nm | 120° | 4TE | 140 mA | – | 7 W/m² | 4 W |
No version matches these filters.
Notes on the specifications table
Additional light colors and versions from UV to infrared available upon request.
Safety note: LED light systems can generate very intense radiation that can damage the eyes if used improperly. Do not look directly into the light beams with unprotected eyes; use suitable eye protection if necessary.
Connection and PIN assignment
M8 Connector 4-pin · 24VDC · 1-channel

| PIN | Farbe | Wire color | Function |
|---|---|---|---|
| 1 | brown | brown | + 24V |
| 3 | blue | blue | - |
M8 Connector 4-pin · 12VDC · 1-channel
1-kanalig · 12VDC · 1-kanalig · M8 Stecker 4-polig

Front view of housing
| PIN | Farbe | Wire color | Function |
|---|---|---|---|
| 2 | white | white | + 12V |
| 3 | blue | blue | - |
M8 Connector 4-pin · SC · 1-channel

| PIN | Farbe | Wire color | Function |
|---|---|---|---|
| 4 | black | black | + |
| 3 | blue | blue | - |
Dimensional drawing
Operating instructions
Application, light guidance, and optics
Custom inquiry
Configure desired version
Let us know your requirements. We will personally confirm the right version, part number, and price.
CAD data for your planning
We would be pleased to support you with CAD data and information on the mechanical integration of your desired version.
Request CAD data →Documents & CAD
Downloads
Product inquiry
TOP-LINE-Serie check for your application
Briefly describe your Prüfaufgabe.


TOP-LINE-Serie
ARCUS-130-DL
ARCUS-190