HELIOS-240

Ringbeleuchtungen

HELIOS-240

  • Außen-/Innendurchmesser: ca. 240 / 190 mm
  • Schutzart (IP): IP54
  • 20 LEDs (1/4 Kanal) bzw. 40 LEDs (2 Kanal)
  • Optional: zweifarbig

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
approx. 240 / 190 mm
Housing
Aluminum, black anodized
Diffuser
PMMA
Weight
approx. 590 g
LEDs
20 (1-/4-Kanal), 40 (2-Kanal)

Additional Technical Specifications

Optional
two-color

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
  • 24 VDC · 2-channelM8 Connector 4-pin
  • SC · 2-channelM8 Connector 4-pin
  • 24 VDC · 4-channelM8 Connector 6-pin
  • SC · 4-channelM8 Connector 6-pin
Protection class (IP)
IP54
Ambient Temperature
max. 50 °C recommended
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LEDs is in the range of several 10.000 to 100.000 hours and is generally very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °Risk groupEN 62471
Red625 nm80°exempt group
Red625 nm36°exempt group
Red625 nm23°exempt group
Red625 nm16°exempt group
white5.000 K80°–
white5.000 K36°–
white5.000 K23°–
white5.000 K16°–
Infrared850 nm80°–
Infrared850 nm36°–
Blue470 nm80°–
Blue470 nm36°–
Blue470 nm23°–
Blue470 nm16°–
IR850 nm23°–
IR850 nm16°–
Green525 nm80°–
Green525 nm36°–
Green525 nm23°–
Green525 nm16°–
IR850 nm90°–

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V (~3mA) - 24V (~30mA) / OFF: < 3,0V

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing HELIOS-240
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – HELIOS-240

Product inquiry

HELIOS-240 check for your application

Briefly describe your Prüfaufgabe.

Product: HELIOS-240

PDF Datasheet · Version 4.0

Select datasheet

HELIOS-240

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.