LOGO-C

Linien- und Balkenbeleuchtungen

LOGO-C

  • Gehäusemaß: 42x15x21 mm
  • klein, kompakt, vielseitig
  • optional unterschiedliche Fronten/Diffusoren und Halbzylinderlinsen erhältlich

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Housing dimensions
42x15x21 mm
Housing
Aluminum natural anodized
Weight
approx. 25 g
LEDs
5

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • 24 VDC with switching input · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
IP50
service life
The service life of LEDs is very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsElectrical powerWRisk groupEN 62471
Red625 nm80°11,9 W0
Green525 nm80°12,4 W0
Blue470 nm80°12,4 W1
white5.000 K80°12,4 W1
Infrared850 nm80°12,4 W0

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · 24VDC with switching input · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-
4blackblackSwitching input*

* ON: 3,7V - 24V / OFF: < 3,7V

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing LOGO-C
05

Operating instructions

Areas of application

Depending on the version, the lights are designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay or controller (IPSC or Gardasoft)

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This version is designed for switching and continuous operation at 24 VDC and has an additional switching input.

Control

A suitable external control signal, such as from a camera, PLC, or similar device, allows the illumination to be selectively switched on and off while power is supplied.

Flash operation

The variant is not suitable for flash operation with excessive currents.

For flash, switched, or brightness-controlled operation, the lighting is optionally available as an SC version optimized for flash operation. They can be used in combination with our IPSC/HPSC series controllers or with Gardasoft controllers and enable optimized or maximum current, especially in pulse mode. We would be happy to advise you on the selection of suitable components.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – LOGO-C

Product inquiry

LOGO-C check for your application

Briefly describe your Prüfaufgabe.

Product: LOGO-C

PDF Datasheet · Version 4.0

Select datasheet

LOGO-C

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.