
Beleuchtungscontroller / Blitzsteuerung
LUCON 2
- Bis 20 A pro Modul
- 1–16 Kanäle
- Konfiguration über integrierte Webseite
- Ethernet und serielle Schnittstelle
Bei 24-VDC-Ausführungen ist für den Dauerbetrieb kein Beleuchtungscontroller erforderlich. Ein Controller kann optional zur Helligkeitsregelung oder für besondere Schalt- und Blitzfunktionen eingesetzt werden. SC-Ausführungen benötigen einen geeigneten Beleuchtungscontroller oder eine Stromquelle mit Strombegrenzung.
Specifications
Technical Specifications
General technical and commercial data
Design & Mechanics
- Dimensions
- 22,6 x 92 x 99 mm
- Weight
- Master: 130 g; Slave: 106 g
Additional Technical Specifications
- Interface Master
- RS232 @ 57600 bps, RJ45/UDP with configuration web page
- Flash duration
- 0,005 - 59000 ms
- Installation
- 35 mm DIN top-hat rail EN50022
Supply & Output Power
- Supply Voltage
- 12 bis 48 VDC
- Output voltage
- 0,7 VDC bis (VIN - 2) VDC
- Output current
- up to 3 A continuous or 20 A pulsed
- Operating temperature
- 0 °C - 50 °C
- Ambient Temperature
- 0 °C bis 50 °C
- Versorgung
- 12 bis 48 VDC
Channels, triggers & interfaces
- Trigger Input
- High 3-24 V; Low 0-1,4 V
- Trigger Output
- Open collector, max. 30 V / 50 mA
Electrical characteristics
Model-dependent characteristics
In narrow view, the table can be shifted sideways.
| variant | Electrical characteristics | |||
|---|---|---|---|---|
| variant | Supply Voltage | Output voltage | Continuous current (output) | max. pulse current |
| LUCON 2 Master – 00039600 | 12 bis 48 VDC | 0,7 VDC bis (VIN − 2) VDC | bis zu 3 A kontinuierlich¹ | up to 20 A pulsed |
| LUCON 2 Slave – 00039601 | 12 bis 48 VDC | 0,7 VDC bis (VIN − 2) VDC | bis zu 3 A kontinuierlich¹ | up to 20 A pulsed |
No version matches these filters.
Notes on the specifications table
If a temperature limit is exceeded, the output switches off automatically. The total current across all modules must not exceed 24 A.
Flash duration: 0,005–59000 ms. Switch-on delay: 0,023–59000 ms.
Master: RS232 at 57600 bps and RJ45 via UDP with configuration website. Slave: Connections for trigger and output.
Dimensions (W × D × H): 22,6 × 92 × 99 mm. Mounting on 35 mm DIN top-hat rail according to EN50022; cooling slots facing up.
Connection and PIN assignment
LUCON² 2 Master · Klemmen und Netzwerk · Master · Anschlussübersicht
1-kanalig · Master · Anschlussübersicht · LUCON² 2 Master · Klemmen und Netzwerk
See table for Anschlussbelegung.
Terminal view as per original
| PIN | Farbe | Wire color | Function |
|---|---|---|---|
| 1 | – | – | GND · Supply GND |
| 2 | – | – | GND · Versorgung GND¹ |
| 3 | – | – | Vcc · Supply +12–48V |
| 4 | – | – | Vcc · Versorgung +12–48V¹ |
| 5 | – | – | TRO- · Trigger Out - |
| 6 | – | – | TRO+ · Trigger Out + |
| 7 | – | – | TRI- · Trigger In - |
| 8 | – | – | TRI+ · Trigger In + |
| 9 | – | – | TXD · RXD PC or PLC |
| 10 | – | – | RXD · TXD PC or PLC |
| 11 | – | – | n.c. |
| 12 | – | – | GND of the RS232 |
| 13 | – | – | Lighting + |
| 14 | – | – | n.c. |
| 15 | – | – | Lighting - |
| 16 | – | – | n.c. |
| 17 (RJ45 Anschluss) | – | – | Ethernet · Network |
LUCON² 2 Master: Klemmen- und Anschlusspositionen laut Original. Position 17 bezeichnet den RJ45-Anschluss, keine RJ45-PIN-Nummer. ¹ Zusätzliche Versorgungsklemmen erforderlich, wenn mehr als acht Leistungsmodule angeschlossen sind.
LUCON² 2 Slave · Klemmen · Slave · Trigger und Beleuchtung
1-kanalig · Slave · Trigger und Beleuchtung · LUCON² 2 Slave · Klemmen
See table for Anschlussbelegung.
Terminal view as per original
| PIN | Farbe | Wire color | Function |
|---|---|---|---|
| 5 | – | – | TRO- · Trigger Out - |
| 6 | – | – | TRO+ · Trigger Out + |
| 7 | – | – | TRI- · Trigger In - |
| 8 | – | – | TRI+ · Trigger In + |
| 13 | – | – | Lighting + |
| 14 | – | – | n.c. |
| 15 | – | – | Lighting - |
| 16 | – | – | n.c. |
For the slave device, the original only shows connections 5–8 and 13–16. Supply, RS232 and RJ45 of the master were not transferred to the slave.
Dimensional drawing
A dimensional drawing for the desired version is available on request.
Operating instructions
Custom inquiry
Select matching controller
Please specify your lighting, the required number of channels, operating mode, and the desired control. We will check the appropriate combination and prepare your quote.
CAD data for your planning
We would be pleased to support you with CAD data and information on the mechanical integration of your desired version.
Request CAD data →Documents & CAD
Downloads
Product inquiry
LUCON 2 check for your application
Briefly describe your Prüfaufgabe.
I-CON
IPSC4