RONDO-M

Ringbeleuchtungen

RONDO-M

  • Außen-/Innendurchmesser: ca. 70,4 / 37,4 mm
  • Montage: M40,5x0,5
  • Schutzart (IP): IP65

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Outer/inner diameter
approx. 70,4 / 37,4 mm
Mounting
M40,5x0,5
Housing
Milled aluminum, silver anodized
Diffuser
PMMA
Weight
approx. 80 g
LEDs
48 or 56 for white

Additional Technical Specifications

Filter thread
M40,5x0,5

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
Protection class (IP)
IP65
Ambient Temperature
max. 50 °C recommended
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LEDs is in the range of several 10.000 to 100.000 hours and is generally very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °Lens / versionChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant currentApproximate values · Measurement directly on the diffuserElectrical powerWRisk groupEN 62471
Red623 nm50°Standard1135 mA900 mA34 W/m²4 Wexempt group
Red623 nm50°Tele1135 mA900 mA64 W/m²4 Wexempt group
White6.500 K45°Standard1150 mA1400 mA30 W/m²4 Wexempt group
Infrared850 nm40°Standard1110 mA2600 mA11 W/m²3 Wexempt group
Infrared850 nm40°Tele1110 mA2600 mA42 W/m²3 Wexempt group
UV365 nm10°Standard1140 mA1120 mA–4 Wexempt group
UV365 nm110°Standard1140 mA1120 mA1,3 W/m²4 Wexempt group
UV375 nm10°–1–––––
UV375 nm110°–1–––––
Blue470 nm30°–1–––––
Green520 nm30°–1–––––

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

Intensity values for standard and telecentric versions must be considered separately.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing
PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue-

M8 Connector 4-pin · SC · 1-channel

Connector drawing
PINFarbeWire colorFunction
4blackblack+
3blueblue-
04

Dimensional drawing

Dimensional drawing RONDO-M
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – RONDO-M

Product inquiry

RONDO-M check for your application

Briefly describe your Prüfaufgabe.

Product: RONDO-M

PDF Datasheet · Version 4.0

Select datasheet

RONDO-M

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.