TOP-LINE-4TE

Linien- und Balkenbeleuchtungen

TOP-LINE-4TE

  • Gehäusemaß: 241 x 28 x 15 mm
  • optional mit Zylinderlinse erhältlich
  • kompakt und vielseitig
  • unterschiedliche Fronten/Diffusoren erhältlich

Variants:

Inquire about product →Datasheet as PDF →

Specifications

Technical Specifications

01

General technical and commercial data

Design & Mechanics

Housing dimensions
241 x 28 x 15 mm
Housing
Aluminum blasted natural anodized
Front / Cover
PMMA
Weight
approx. 190 g
LEDs
32

Operation & Connection

Electrical versions and connections
  • 24 VDC · 1-channelM8 Connector 4-pin
  • SC · 1-channelM8 Connector 4-pin
Ambient Temperature
max. 50 °C recommended
Protection class (IP)
IP50
electrical protection class
III, safety extra-low voltage operation
Compliance
CE, RoHS
service life
The service life of LEDs is in the range of several 10.000 to 100.000 hours and is generally very high, but depends on many different factors such as ambient temperature, current load, etc.
Service life explained in WikiLED →
02

Model-dependent characteristics

Model-dependent characteristics

In narrow view, the table can be shifted sideways.

variantCurrent and flash operationMeasured values and classification
Light colourWavelength / Color Temperaturenm / KBeam angleLED · °ChannelsCurrent consumption24VDC type / max. Konstantstrom SC-TypApproximate valuesMax. pulse current24VDC type / SC-Typ
t < 1 ms
Duty Cycle 1:10
Depending on flash conditions
IrradianceW/m² at constant current
@ 0,2 m
Approximate values · Distance from bottom edge of housing
Electrical powerWRisk groupEN 62471
Red617 nm30°1140 mA400 mA31 W/m²4 Wexempt group
Red617 nm60°1140 mA400 mA25 W/m²4 Wexempt group
Red635 nm120°1100 mA400 mA–3 Wexempt group
White5.200 K120°1100 mA400 mA6 W/m²3 Wexempt group
Infrared850 nm30°1130 mA1600 mA20 W/m²4 Wexempt group
Infrared850 nm50°1130 mA1600 mA–4 Wexempt group
Infrared850 nm120°1–1600 mA20Wm²––
UV375 nm120°1140 mA–7 W/m²4 W–
Blue470 nm30°––––––
Blue470 nm120°––––––
Green525 nm30°––––––
Green525 nm120°––––––

Notes on the specifications table

Additional light colors and versions from UV to infrared available upon request.

03

Connection and PIN assignment

M8 Connector 4-pin · 24VDC · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
1brownbrown+ 24V
3blueblue- (Kanal 1 / Channel 1)

Exclusively einkanalig Ausführung: PIN 1 is +24V, PIN 3 is minus (channel 1). The connection to PIN 4 shown in parentheses in the original is not part of this Anschlussbelegung. Its German and English channel numbers contradict each other; technical clarification is still required for mehrkanalig use.

M8 Connector 4-pin · SC · 1-channel

Connector drawing

Front view of housing

PINFarbeWire colorFunction
4blackblack+
3blueblue- (Kanal 1 / Channel 1)

Single-channel version: PIN 4 is positive, PIN 3 is negative (channel 1). The optional second channel at PIN 2 shown in brackets in the original does not belong to this single-channel assignment. The separate two-channel profile applies to the two-channel version.

04

Dimensional drawing

Dimensional drawing TOP-LINE-4TE
05

Operating instructions

Areas of application

This version is designed for continuous operation at 24VDC.

Operating modes

  • DC operation on a suitable power supply with 24VDC
  • switched operation on a suitable power supply via e.g. PLC, opto-relay
  • switched operation on a lighting controller (e.g. IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply
  • brightness-controlled operation via lighting controller (IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply

Flash operation

Flash operation via controller (e.g., IPSC/HPSC or Gardasoft) in conjunction with a suitable power supply. Depending on the lighting controller used and the maximum available output/flash voltage, the flash current in this combination can be increased by a maximum factor of 2 to 3 in order to remain within the permitted voltage range of the output/flash voltage of max. 50V.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

Areas of application

This low-resistance version, optimized for flash operation, can also be used for switched, brightness-controlled, and continuous operation.

Required supply

One of the following power supplies is required for operation:

  • a lighting controller, e.g. from the IPSC/HPSC series, from Gefasoft or Gardasoft, or
  • a current source with current limiting.

Flash operation

Due to its low-resistance design, the SC version is particularly suitable for maximum current in flash operation. Compared to the 24-VDC types, output or flash voltages in the usual range up to a maximum of 50 V can be used.

As a result, the maximum flash current is typically significantly above the factor 2–3.

Current limits

The maximum permissible currents for continuous and flash operation are also specified on the product label of the respective lighting.

06

Application, light guidance, and optics

Application and light guidance

Application and light guidance – TOP-LINE-4TE

Product inquiry

TOP-LINE-4TE check for your application

Briefly describe your Prüfaufgabe.

Product: TOP-LINE-4TE

PDF Datasheet · Version 4.0

Select datasheet

TOP-LINE-4TE

Scope of the Data Sheet

The datasheet opens in a new tab. You can save it there as a PDF.